DCLI commands for Exadata
189 commands, grouped by what they do.
Check status and configuration
dcli -g dbs_group -l root "crsctl stat res -t"Runs crsctl stat res -t across dbs_group to display Clusterware resource target and state in a tabular view. Read-only; useful for comparing resource placement and failures across database servers.
dcli -g dbs_group -l root "imageinfo"Runs imageinfo on every host in dbs_group to report the active Exadata image, kernel, and image status details from each database server. Read-only; useful for comparing patch levels or validating post-maintenance image state.
dcli -g dbs_group -l root "asmcmd lsdg"Runs ASMCMD lsdg on every database server in dbs_group and returns ASM disk group state, redundancy, capacity, and free space as seen from each node. Read-only; useful for spotting disk group visibility or capacity differences.
dcli -g cells_group -l celladmin "df -h"Runs the Linux df command across storage cells through DCLI to show mounted filesystem capacity in human-readable units. It is useful for comparing OS filesystem pressure across cells during health checks or incident triage.
dcli -g dbs_group.txt -l root "uptime"Runs uptime across the database servers in dbs_group.txt. It reports host uptime and load averages, making it useful for spotting recent reboots or uneven load across nodes.
dcli -g cells_group -l celladmin "imageinfo"Runs imageinfo across storage cells to display Exadata image and software information from each target. It is a read-only way to compare image state across cells before patching, after maintenance, or during support review.
dcli -g dbs_group -l root "srvctl status asm"Runs SRVCTL status asm on each database server through DCLI. It compares ASM resource status as seen from the nodes, which is useful before ASM, GI, or database maintenance.
dcli -g cells_group -l celladmin "CellCLI -e list griddisk where asmdeactivationoutcome != 'Yes'"Lists grid disks whose ASM deactivation outcome is not reported as safe across storage cells. It is used before cell or grid disk maintenance to find disks that should not be deactivated blindly.
dcli -g cells_group -l celladmin "CellCLI -e 'LIST GRIDDISK ATTRIBUTES name,size,asmDeactivationOutcome'"Lists each grid disk's name, size, and asmDeactivationOutcome across storage cells. This helps confirm whether grid disks can be safely deactivated from ASM's perspective before cell or disk maintenance.
dcli -g ~/dbs_group -l root imageinfo -verRuns imageinfo -ver as root across the database servers listed in ~/dbs_group. It reports the Exadata image version on each target so patch or replacement-server consistency can be checked quickly.
dcli -g ~/dbs_group -l root "hostname"Runs 'hostname' as root on every host in the dbs_group file via DCLI, printing each node's name prefixed by its DCLI target. A quick connectivity/identity smoke test confirming DCLI can reach every DB node and the group file is correct. Read-only.
dcli -g dbs_group -l root "df -h"Uses DCLI to run 'df -h' on every database node in the dbs_group host file (as root), reporting file-system usage on each node in one pass with per-host prefixes. Read-only; quick way to spot a node where a mount point is filling up.
dcli -g dbs_group -l root "lsnrctl status"Runs lsnrctl status across database servers to show local listener status and registered services from each node. It is a distributed listener check for RAC or database connectivity triage.
dcli -g dbs_group -l root "netstat -rn"Runs netstat -rn across the database servers in dbs_group through DCLI. It shows each host's numeric routing table so default gateways, static routes, and node-to-node routing drift can be compared quickly.
dcli -g dbs_group -l root "ip addr show"Runs ip addr show across database servers to list interface addresses, link state, and assigned IPs. It is a fast OS-level check for management, client, backup, and private-network address configuration.
dcli -g cell_group -l celladmin "cellcli -e 'LIST CELL ATTRIBUTES name,status,releaseVersion'"Runs a CellCLI LIST CELL attributes query across the storage cells in the DCLI group. It returns each cell name, status, and Exadata System Software release version for quick rack-wide comparison.
dcli -g cell_group -l celladmin "cellcli -e 'LIST GRIDDISK ATTRIBUTES name,status,asmModeStatus,size'"Runs a CellCLI LIST GRIDDISK attributes query across the storage cells in cell_group. It returns each grid disk's name, status, ASM mode status, and size without changing storage.
dcli -g <CELL_GROUP_FILE> -l celladmin "cellcli -e 'LIST CELL DETAIL'"Runs CellCLI LIST CELL DETAIL on every storage cell listed in the DCLI group file. It returns detailed cell attributes such as flash cache mode and service state without changing cell configuration.
dcli -g cells_group -l celladmin "CellCLI -e list griddisk"Lists grid disks across the storage cells in the DCLI group. It provides a rack-level inventory view for grid disk presence and basic state before drilling into detail or attribute filters.
./dcli -g allcells "cellcli -e 'LIST PHYSICALDISK WHERE status != normal'"Runs a CellCLI physical-disk health query across all storage cells and returns disks whose status is not normal. It is a read-only rack-wide hardware triage command.
dcli -g <DB_NODE_GROUP_FILE> -l grid "asmcmd lsdg"Runs ASMCMD lsdg as the grid user across database nodes listed in a DCLI group file. It is a read-only fan-out check for comparing mounted ASM disk groups and capacity information across DB nodes.
dcli -g dbs_group -l root "crsctl check cluster -all"Runs crsctl check cluster -all through DCLI from database servers. It is a read-only distributed check of Clusterware service status across the cluster.
dcli -g cell_group -l root cellcli list alerthistoryRuns 'cellcli list alerthistory' on every storage cell named in the cell_group file via DCLI, prefixing each line with the cell name so alerts can be compared across the rack in one pass. Read-only inspection of cell alert history; the trailing '| more' in the original is just a local pager and is unnecessary.
dcli -g cells_group -l celladmin "CellCLI -e LIST CELLDISK"Runs CellCLI LIST CELLDISK across the storage cells in the DCLI group. The output gives a concise inventory of cell disks across cells without the full detail view.
dcli -g cells_group -l celladmin "CellCLI -e list physicaldisk attributes name,disktype,status"Lists selected physical disk attributes across storage cells for a compact hardware status inventory. It is useful for comparing disk names, disk types, and status values without dumping every attribute.
dcli -g cells_group -l celladmin "CellCLI -e list flashcache"Lists flash cache objects across the storage cells in the DCLI group. Use it for a quick comparison of flash cache presence and basic status before deeper flash cache detail checks.
dcli -g <CELL_GROUP_FILE> -l celladmin "cellcli -e 'LIST GRIDDISK DETAIL'"Runs CellCLI LIST GRIDDISK DETAIL across the storage cells in a DCLI group. It returns detailed grid disk attributes such as size, status, cell disk mapping, and ASM-related state without changing storage.
dcli -g <CELL_GROUP_FILE> -l celladmin "imageinfo"Runs imageinfo on each host in the DCLI group to display Exadata image and system image details. This is a read-only way to compare image state across multiple cells or nodes.
./dcli -l celladmin -r '.*normal' -g mycells "cellcli -e list celldisk"Runs CellCLI LIST CELLDISK across the hosts in the mycells group and applies a DCLI regular-expression filter for rows matching normal. The command is read-only, but it fans out the check across multiple storage cells.
dcli -g cells_group -l celladmin "CellCLI -e list cellsrvstatus"Queries Cell Server status across all storage cells in the DCLI group. It is a fast rack-level health check for whether cell services are online and consistent.
dcli -g <CELL_GROUP_FILE> -l celladmin "cellcli -e 'LIST PHYSICALDISK DETAIL'"Runs CellCLI LIST PHYSICALDISK DETAIL across storage cells. It returns detailed disk identity, firmware, slot, size, and status metadata for hardware triage.
dcli -g ~/cell_group -l root imageinfo -verRuns imageinfo -ver through DCLI across the hosts listed in the cell group file. It is read-only and returns Exadata image versions so differences across storage cells are visible in one pass.
dcli -g <CELL_GROUP_FILE> -l celladmin "cellcli -e 'LIST ALERTHISTORY ORDER BY beginTime DESC LIMIT 20'"Runs a CellCLI alert-history query on every storage cell in the DCLI group and returns the 20 most recent alert history entries per cell. It is read-only and useful for building a rack-wide incident timeline.
dcli -g <DB_NODE_GROUP_FILE> -l grid "crsctl status resource -t"Runs crsctl status resource -t across the database nodes in the DCLI group. It prints the Clusterware resource table on each node so resource state differences are visible.
dcli -g cell_group -l celladmin "cellcli -e 'LIST PHYSICALDISK'"Runs CellCLI LIST PHYSICALDISK across the storage cells in a DCLI group. It gives a rack-wide read-only view of physical disk names, identifiers, and status summaries.
dcli -g dbs_group.txt -l root "df -h"Runs df -h across database servers to show mounted filesystem capacity and usage. It is a quick way to compare OS filesystem pressure across DB nodes before narrowing to /u01, /u02, trace, or backup locations.
dcli -g cells_group.txt -l root "cellcli -e list physicaldisk attributes name,serialNumber,status"Lists physical disk name, serial number, and status across storage cells. It is a compact hardware evidence command for disk replacement planning, support cases, and rack-level health checks.
dcli -g cells_group.txt -l root "cellcli -e list flashcache detail"Shows detailed flash cache metadata across storage cells in a DCLI group file. It is a read-only rack-level check for flash cache configuration and status during performance or storage triage.
dcli -g cell_group -l celladmin "cellcli -e 'LIST ALERTHISTORY WHERE endTime = null'"Runs a CellCLI alert-history filter across storage cells to show alerts that have not cleared. It is read-only and useful for finding active cell alert conditions across the rack.
dcli -g <DB_NODE_GROUP_FILE> -l oracle "srvctl status database -db <DB_UNIQUE_NAME> -detail"Runs srvctl status database -detail for the specified database unique name across the database nodes in the DCLI group. It reports instance and database status without starting, stopping, or relocating anything.
dcli -g all_group.txt -l root "imageinfo | egrep 'Version|Date'"Runs imageinfo on all hosts in all_group.txt and filters the output to version and date lines. It is a read-only image consistency check before patching or support work.
dcli -g <DB_NODE_GROUP_FILE> -l grid "crsctl check crs"Runs crsctl check crs as the Grid Infrastructure owner across the database nodes in the DCLI group. It reports whether the local Clusterware stack is online on each node without changing CRS state.
dcli -g cells_group -l celladmin "cellcli -e 'LIST ALERTHISTORY DETAIL'"Runs CellCLI LIST ALERTHISTORY DETAIL across storage cells. It returns detailed alert attributes per cell and is useful when the summary alert list is not enough for incident evidence.
dcli -g <CELL_GROUP_FILE> -l celladmin "cellcli -e 'LIST CELLDISK DETAIL'"Runs a CellCLI cell disk detail listing across the storage cells in a DCLI group. It is used to inspect cell disk state, mappings, and capacity details without changing cell disk configuration.
dcli -g cells_group -l celladmin "CellCLI -e list cell attributes releaseVersion,makeModel,status"Collects release version, hardware model, and status for each storage cell in a DCLI group. This is a compact rack inventory check for support, patch planning, and configuration comparison.
./dcli -c cell04 "cellcli -e 'LIST GRIDDISK'"Runs a read-only CellCLI grid disk listing on the storage cell named cell04 through DCLI. It is useful for checking grid disk names and status on one target while keeping the DCLI invocation style.
dcli -g cells_group -l celladmin "CellCLI -e list alert -detail"Runs a detailed CellCLI alert listing across the storage cells named in a DCLI group file. Use it to compare current alert records and detailed alert fields across the rack without logging in to each cell individually.
dcli -g dbs_group -l root "srvctl status database -d <db_name>"Runs 'srvctl status database -d <db_name>' on every host in dbs_group via DCLI to report which instances of the database are running and on which nodes. Read-only; running it fleet-wide is largely redundant (SRVCTL is cluster-aware) but confirms consistent Clusterware view from each node.
dcli -g dbs_group -l root "srvctl status scan_listener"Runs SRVCTL status scan_listener on each database server through DCLI. It checks SCAN listener resource status from the node perspective during RAC connection or listener triage.
dcli -g dbs_group -l root "srvctl status listener"Runs the SRVCTL listener status query on every host in the dbs_group file. It shows whether Oracle-managed listeners are running on each database server without starting, stopping, or relocating anything.
dcli -g cells_group -l celladmin "CellCLI -e list metriccurrent where name like 'CL_%'"Runs CellCLI LIST METRICCURRENT filtered to cell-level metrics (names beginning CL_, e.g. CPU, memory, network) on every cell in cells_group via DCLI. Read-only; the CL_ prefix isolates whole-cell metrics from disk- or flash-level ones.
dcli -g cells_group -l celladmin "CellCLI -e list iormplan"Lists I/O Resource Manager plan state across storage cells in the DCLI group. It is useful for confirming whether cells have consistent IORM plan configuration during performance triage.
dcli -g dbs_group -l root "crsctl stat res -w \"TYPE = ora.asm.type\" -t"Runs crsctl stat res with a resource type filter for ASM resources across dbs_group. Read-only; it shows ASM Clusterware target and state in tabular form on each server.
dcli -g dbs_group -l root "date"Runs date on every host in dbs_group to show the current system time and timezone reported by each server. Read-only; use it as a quick check for clock skew or host reachability.
dcli -g dbs_group -l root "olsnodes -n"Runs 'olsnodes -n' (list cluster nodes with their node numbers) on every host in dbs_group via DCLI. Read-only Clusterware inspection; comparing the output per node confirms each sees the same cluster membership.
dcli -g dbs_group -l root "ps -ef | grep pmon | grep -v grep"Lists PMON processes on each database server in the DCLI group. The output is a quick OS-level view of which database or ASM instances appear to be running on each node.
dcli -g cells_group.txt -l root "cellcli -e list cell attributes name,releaseVersion"Lists storage cell names and release versions across the cells in a DCLI group file. It is a compact rack inventory check for image comparison, patch planning, and support evidence.
dcli -g cells_group -l celladmin "CellCLI -e list metriccurrent"Runs CellCLI LIST METRICCURRENT (unfiltered) on every cell in cells_group via DCLI, returning the full current metric set per cell. Read-only; the broad form used when you want every metric rather than a CL_/CD_/FD_ subset.
dcli -g dbs_group -l root "dbmcli -e 'LIST DBSERVER ATTRIBUTES status,upTime,releaseVersion,msStatus,rsStatus'"Runs DBMCLI on each database server to list server status, uptime, release version, management server status, and restart server status. Read-only; it gives a compact Exadata database server health and software version snapshot.
dcli -g /opt/oracle.cellos/host_group_file -l root "cellcli -e 'LIST CELL DETAIL'"Runs CellCLI LIST CELL DETAIL across the hosts in the specified Exadata host group file. It returns detailed cell attributes from each target and is read-only.
./dcli -g mycells "cellcli -e list metriccurrent cl_cput"Runs a CellCLI current metric lookup for CL_CPUT across the cells in the mycells DCLI group. It is read-only and gives a quick cross-cell view of the cell CPU utilization metric.
dcli -g cell_group -l celladmin "cellcli -e 'LIST METRICCURRENT CL_CPUT'"Runs the CellCLI LIST METRICCURRENT CL_CPUT query across the cells in cell_group. It returns current cell CPU utilization metric data without changing configuration or workload placement.
dcli -g cells_group -l celladmin "uptime"Runs uptime on each storage cell in the DCLI group. It gives a quick view of reboot recency and load averages across cells during availability or patching checks.
dcli -g all_group -l root -f /tmp/script.sh -d /tmp/Copies a local script file to the specified destination directory on every server in the DCLI group. The -f option copies files; it does not execute the script by itself.
dcli -g ~/db_group -l root -k -s '-o StrictHostKeyChecking=no'Runs DCLI SSH key setup for root across the hosts in ~/db_group while passing an SSH option that disables strict host key checking. It can bootstrap access when host keys are not yet trusted, but it weakens host identity verification during the exchange.
dcli -g dbs_group -l root "crsctl stat res -w \"TYPE = ora.scan_listener.type\" -t"Runs CRSCTL across database servers to show the tabular status of Clusterware resources whose type is ora.scan_listener.type. It is read-only and helps confirm SCAN listener placement and state across the cluster.
dcli -g cells_group -l celladmin "CellCLI -e list alert"Lists current CellCLI alerts across every storage cell in the DCLI group. It gives a quick rack-level alert inventory before drilling into detailed alert records or individual cells.
./dcli -g allcells "cellcli -e 'LIST CELLDISK WHERE freespace > 100M'"Runs a read-only CellCLI cell disk query across all cells and filters for cell disks with more than 100 MB free space. It helps compare free-space state across storage cells without changing any disk object.
dcli -g cells_group -l celladmin "tail -100 /var/log/cellos/alert.log"Shows the last 100 lines of the cellos alert log on each storage cell in the DCLI group. It is useful for quickly comparing recent local cell messages alongside CellCLI alert and event output.
dcli -g dbs_group -l root "crsctl query css votedisk"Runs crsctl query css votedisk across dbs_group to show the voting disk state and disk group location as seen from each server. Read-only; useful when checking quorum visibility or OCR/voting disk placement.
dcli -g dbs_group -l root "free -g"Runs free -g on each host in dbs_group to report memory totals, used memory, free memory, and cache/buffer values in gigabytes. Read-only; useful for comparing host memory pressure across database servers.
dcli -g dbs_group -l root "ibstat"Runs ibstat across dbs_group to show InfiniBand adapter and port state from each server. Read-only; useful for spotting down links, inactive ports, or inconsistent fabric visibility.
dcli -g ~/dom0_group -l root "imageinfo -ver"Runs imageinfo -ver across the management-domain or KVM host group listed in ~/dom0_group. It verifies Exadata image versions on those hosts so they can be compared with database servers or VM image requirements.
dcli -l root -g all_group dateRuns date across every host listed in the all_group DCLI file. It is a quick rack-wide check for host reachability and obvious time skew before comparing logs or incident timestamps.
dcli -g dbs_group -l root "srvctl config database"Runs the read-only SRVCTL database configuration listing across the hosts in the dbs_group DCLI file. It helps compare which databases are registered with Clusterware on each database server and quickly exposes node-to-node configuration drift.
./dcli -r '.*active' -g mycells "cellcli -e 'LIST GRIDDISK'"Runs CellCLI LIST GRIDDISK across the mycells group and uses DCLI -r to abbreviate output lines matching the active pattern. It is read-only and can make nonmatching or abnormal grid disk lines easier to spot in multi-cell output.
dcli -g cells_group -l celladmin "CellCLI -e list metrichistory where collectionTime > '1 hour ago'"Collects recent CellCLI metric history from each storage cell for records newer than one hour. It is a read-only time-windowed evidence pull for storage performance or health investigations.
dcli -g /opt/oracle.SupportTools/onecommand/cell_group -l root dmidecode -s system-serial-numberRuns the read-only dmidecode serial-number query across hosts listed in the Exadata storage-cell group file. It helps verify hardware identity or match inventory across storage cells in one pass.
dcli -g dbs_group -l root "ocrcheck"Runs ocrcheck on each database server in the DCLI group to report Oracle Cluster Registry integrity and configured OCR locations. It is a distributed wrapper around a Grid Infrastructure diagnostic command, useful when checking cluster metadata health across nodes.
dcli -g dbs_group.txt -l root dateRuns the date command across the database servers in dbs_group.txt. It is a quick read-only sanity check for host reachability and obvious clock skew between nodes.
dcli -g cells_group -l celladmin "CellCLI -e list metriccurrent where name like 'CD_%'"Runs CellCLI LIST METRICCURRENT filtered to cell-disk metrics (names beginning CD_, e.g. per-cell-disk IOPS, throughput, latency) on every cell in cells_group via DCLI. Read-only; the CD_ prefix isolates physical-disk-level metrics.
dcli -g dbs_group -l root "iostat -xm 1 3"Runs iostat with extended disk metrics at one-second intervals for three samples on every host in dbs_group. Read-only; useful for comparing device utilization, service time, and throughput across database servers.
dcli -g dbs_group.txt -l root "df -h | grep -E '/u01|/u02'"Runs df -h on each database server and filters for /u01 and /u02 file systems. It is a read-only space check for Oracle software, diagnostic, or staging mount pressure across nodes.
dcli -g dbs_group -l root "crsctl stat res -w \"TYPE = ora.listener.type\" -t"Runs CRSCTL on each database server to show Clusterware resources of type ora.listener.type. It helps compare listener resource placement and state across nodes from one DCLI command.
dcli -l root -g cell_group imageinfo -ver -inactiveRuns imageinfo on each host in cell_group to report the inactive Exadata image version. It is a read-only image inventory check, useful before or after patching when the inactive image matters.
dcli -g cells_group -l celladmin "cellcli -e 'LIST IBPORT'"Runs CellCLI LIST IBPORT across storage cells to display InfiniBand port attributes and status. It is read-only and helps compare RDMA fabric port visibility across cells.
dcli -g cells_group -l celladmin "CellCLI -e list lun"Runs 'CellCLI -e list lun' on every cell in cells_group via DCLI to list the LUNs (the raw devices CellCLI presents from each physical disk/flash device) per cell. Read-only; used to confirm all expected LUNs are present and normal across the storage grid.
dcli -g dbs_group -l root "cat /etc/oracle-release"Displays the Oracle Linux release file on each database server in the DCLI group. It is a quick read-only check for OS release consistency across database nodes.
dcli -g dbs_group -l root "srvctl status vip -n $(hostname)"Runs srvctl status vip on each database server so every node checks the VIP associated with its own hostname. It is a read-only RAC network check for comparing Clusterware VIP state across Exadata database nodes.
dcli -g dbs_group -l root "srvctl config scan"Runs the SRVCTL SCAN configuration query across database servers through DCLI. It reports SCAN VIP/name configuration as seen from each target, which is useful when checking Clusterware network configuration drift.
dcli -l root -g ~/dbs_group -kUses DCLI with -k to set up SSH equivalence for the root user across the hosts listed in dbs_group. It changes authentication state by installing or configuring SSH key access, so the target group must be exact.
dcli -g cells_group -l celladmin "CellCLI -e list cell attributes mailServer"Lists the mailServer alert-notification attribute across storage cells. The source row used unsupported smtpserver syntax, so this record keeps the documented CellCLI cell attribute used for the mail relay server.
dcli -g cells_group -l celladmin "cellcli -e list ms"Uses DCLI to run 'cellcli -e list ms' on every storage cell in the cells_group host file (as celladmin), reporting the Management Server (MS) status on each cell in one pass. Read-only; output is prefixed by host so you can spot a cell where MS is not running.
dcli -g cells_group -l celladmin "grep -i error /var/log/cellos/alert.log | tail -50"Searches each storage cell's cellos alert log for recent lines containing error and returns the last 50 matches. It is a fast, read-only triage command before collecting fuller logs or support bundles.
dcli -g <CELL_GROUP_FILE> -l celladmin "cellcli -e \"LIST METRICCURRENT WHERE objectType = 'CELL' DETAIL\""Runs a CellCLI METRICCURRENT query for metrics whose object type is CELL across the storage cells in a DCLI group. It returns current cell-level metric values in detail form without changing state.
dcli -g dbs_group -l root "asmcmd lsattr -l -G RECO"Runs ASMCMD lsattr for the RECO disk group on each server in dbs_group and lists disk group attributes in long form. Read-only; use it to compare ASM attribute visibility and values across cluster nodes.
dcli -g dbs_group -l root "dmesg | tail -50"Runs dmesg and returns the last 50 kernel messages from each server in dbs_group. Read-only; useful for spotting recent hardware, driver, filesystem, or kernel warnings across the rack.
dcli -g dbs_group -l root "ps -ef | grep asm_pmon | grep -v grep"Runs a ps/grep for the asm_pmon process on every host in dbs_group via DCLI, so you can see whether the ASM instance is running on each node. Read-only; a fast way to confirm ASM is up cluster-wide.
dcli -g dbs_group -l root "srvctl status nodeapps"Runs the SRVCTL nodeapps status check across the database server group. It reports node-level Clusterware application resources such as VIPs and listeners so differences across nodes are visible.
dcli -g dbs_group -l oracle dateRuns the date command across database servers through DCLI to show the current OS time on each host. It is a quick read-only sanity check for clock skew, host reachability, and DCLI group coverage.
dcli -g <CELL_GROUP_FILE> -l root "hostname; uptime"Runs hostname and uptime on each host in the DCLI group. It is a read-only sanity check for host identity, reachability, load average, and reboot age across multiple Exadata hosts.
dcli -g cells_group -l celladmin "CellCLI -e list metriccurrent where name like 'FD_%'"Runs CellCLI LIST METRICCURRENT filtered to flash-disk metrics (names beginning FD_, the per-flash-device metrics) on every cell in cells_group via DCLI. Read-only; the FD_ prefix isolates flash-device-level metrics from cell and cell-disk ones.
dcli -g dbs_group -l root "tail -50 /var/log/messages"Reads the last 50 lines of /var/log/messages across the database servers in dbs_group. It gives a quick rack-wide view of recent OS events without changing log files.
dcli -g cell_group -l root -kSets up SSH user equivalence for the specified user across the hosts in cell_group. It appends public key material to target authorized_keys files so later DCLI commands can run without repeated password prompts.
dcli -g cells_group -l celladmin "cellcli -e 'LIST FLASHLOG'"Runs CellCLI LIST FLASHLOG across the storage cells in a DCLI group. It is a read-only check of Oracle Exadata Smart Flash Log objects and their status on each cell.
dcli -g cell_group cellcli -e list flashcache attributes effectiveCacheSizeQueries the effectiveCacheSize attribute of FLASHCACHE on every cell in cell_group via DCLI, returning each cell's usable flash cache size. Read-only; useful for confirming flash cache is sized consistently across the storage grid.
dcli -g dbs_group -l root "cat /proc/meminfo | head"Reads the first lines of /proc/meminfo on each host in dbs_group to compare memory totals and high-level memory state. Read-only; it is a quick rack-wide sanity check before deeper OS or database memory analysis.
dcli -g dbs_group -l root "chronyc tracking"Runs chronyc tracking on every host in dbs_group to show NTP/chrony synchronization state, offset, and reference source. Read-only; useful for spotting clock drift that can affect cluster, database, and diagnostic timelines.
dcli -g dbs_group -l root "ethtool eth0"Runs ethtool eth0 as root on every host listed in the dbs_group file in one pass, reporting link speed, duplex, and link state for the eth0 NIC on each database node. Read-only inspection used to spot a misnegotiated or down interface that differs from its peers across the rack.
dcli -g dbs_group -l root "journalctl -p err -n 50 --no-pager"Runs journalctl on every host in dbs_group and returns the 50 most recent error-priority journal entries without paging. Read-only; useful for quickly comparing recent OS and service errors across database servers.
dcli -g cells_group -l celladmin "CellCLI -e list threshold"Lists CellCLI threshold objects across the storage cells in a DCLI group. Use it to compare alert threshold configuration at rack level before changing thresholds or opening a support case.
dcli -g cells_group.txt -l root "cellcli -e list iormplan detail"Shows detailed I/O Resource Manager plan configuration across storage cells. Use it to compare IORM state across the rack during performance triage or before policy changes.
dcli -g dbs_group -l root "asmcmd lsdsk -p"Runs ASMCMD lsdsk -p across dbs_group to list ASM disk paths as seen by each database server. Read-only; useful when validating device discovery, candidate disks, or inconsistent ASM disk visibility.
./dcli -g cell_group -l root 'hostname -i'Runs hostname -i across the hosts listed in the cell_group DCLI file. It is read-only and returns IP addresses for comparing or verifying storage-cell host identity.
dcli -g dbs_group -l root "asmcmd lsct"Runs ASMCMD lsct across the database servers in a DCLI group to show ASM client connections by node. It is useful when checking whether database instances, volumes, or cluster components are attached to ASM consistently across the rack.
dcli -g dbs_group -l root "cluvfy comp nodecon -n all -verbose"Runs CLUVFY node connectivity verification from each database server in dbs_group with verbose output. Read-only; it checks cluster node connectivity evidence without changing Clusterware configuration.
dcli -g dbs_group -l root "mpstat -P ALL 1 3"Runs mpstat on each database server to sample per-CPU utilization three times at one-second intervals. It gives a short cross-node CPU snapshot for spotting skew, saturation, or unusually busy cores.
dcli -g dbs_group -l root "systemctl --failed"Runs a read-only systemd failed-unit listing across the database servers in dbs_group. It helps spot failed OS services that may explain node, monitoring, time sync, or support-tool issues.
dcli -g dbs_group.txt -l oracle "free -g"Runs free -g across the database servers listed in dbs_group.txt as the oracle user. It gives a quick host-by-host memory summary in gigabytes without changing system state.
dcli -k -g cellsSets up SSH user-equivalence for the current user across the hosts listed in the DCLI group file named cells. It writes SSH trust material so later DCLI commands can run across the group without repeated password prompts.
dcli -g cells_group -l celladmin "CellCLI -e list flashlog detail"Shows detailed flash log metadata across the storage cells in a DCLI group. It is a read-only rack-level check for flash log configuration and status during performance or storage triage.
./dcli -t -c exa01celadm09 dateRuns date on a named target with DCLI and uses -t to display the target servers selected for execution. It is a read-only connectivity and clock sanity check for a specific cell.
dcli -g dbs_group -l root "df -i"Runs df -i across database servers to report inode usage for mounted file systems. It is read-only and catches inode exhaustion cases that ordinary space checks can miss.
dcli -g dbs_group -l root "uname -a"Runs uname -a across the database servers in dbs_group. It reports kernel and OS build details so node image or kernel mismatches can be spotted quickly.
dcli -g cells_group -l celladmin "CellCLI -e list metrichistory where objectType = 'CELL'"Filters metric history to CELL object records across the storage cells in a DCLI group. Use it when cell-level health or performance metrics matter more than disk, grid disk, or database-scoped objects.
dcli -g /opt/oracle.SupportTools/onecommand/dbs_group -l root dmidecode -s system-serial-numberRuns the read-only dmidecode serial-number query across hosts listed in the Exadata database-node group file. It is useful for verifying hardware identity or matching inventory across multiple database servers in one pass.
dcli -g dbs_group -l root "ping -c 2 <SCAN_NAME>"Runs a short ping test to the SCAN name from each database server. It checks basic name resolution and network reachability from the server perspective, though it does not prove listener or service registration health.
dcli -g dbs_group -l root "vmstat 1 5"Runs vmstat with one-second sampling for five intervals across the database servers in dbs_group. It gives a quick comparison of CPU run queue, memory, swap, and IO pressure across nodes.
./dcli --showbanner -l root -g cell "cellcli -e 'LIST CELL'"Runs CellCLI LIST CELL across the hosts in the cell group and prints each remote node banner with the output. It is read-only and helps map cell-level state back to the cell that produced it.
dcli -g cells_group -l celladmin "cellcli -e 'LIST CELL ATTRIBUTES snmpSubscriber'"Runs a CellCLI CELL attribute query across storage cells to display configured SNMP subscribers. This is the supported way to inspect snmpSubscriber settings; LIST SNMPSUBSCRIBER is not a CellCLI object.
dcli -g dbs_group -l root "lscpu"Runs lscpu on each host in dbs_group to report CPU architecture, sockets, cores, threads, NUMA layout, and related CPU flags. Read-only; useful for comparing hardware shape or virtualized CPU presentation across servers.
dcli -g dbs_group -l root "srvctl config vip -n \$(hostname)"Runs 'srvctl config vip -n <hostname>' on every host in dbs_group via DCLI, so each node reports its own node VIP configuration (VIP name, address, interface). Read-only; the $(hostname) expansion makes each node query its own VIP rather than a fixed one.
dcli -g cells_group -l celladmin "cellcli -e 'LIST DATABASE'"Runs CellCLI LIST DATABASE across storage cells to show active databases known to each cell. It is read-only and helps compare cell-local database visibility for offload, IORM, and cache policy checks.
dcli -g cells_group -l celladmin "CellCLI -e list metriccurrent where name like 'GD_%'"Lists current CellCLI metrics whose names begin with GD_ across the storage cells in the DCLI group. These are grid disk metrics, useful for comparing IO, latency, and activity signals across cells.
dcli -g dbs_group -l root "getent hosts <SCAN_NAME>"Runs getent hosts for a SCAN name from each database server in the DCLI group. It checks what each node resolves through the configured name-service stack, not just through DNS directly.
dcli -g cells_group -l celladmin "top -b -n 1 | head -40"Runs a one-pass batch top snapshot across storage cells and returns the first lines of output. It is useful for a quick rack-wide CPU and process snapshot during incident triage without starting an interactive top session.
dcli -g dbs_group -l root "asmcmd lspwusr"Runs ASMCMD lspwusr on every server in dbs_group to list users in the local Oracle ASM password file. Read-only, but the output is security-relevant because it exposes ASM password-file accounts.
dcli -g dbs_group -l root "top -b -n 1 | head -40"Collects a one-shot batch-mode top summary from every database server in dbs_group and trims the output to the first 40 lines. It is useful for comparing CPU, memory, and top processes across nodes without opening interactive top sessions.
dcli -g cells_group -l celladmin "CellCLI -e 'LIST CELL ATTRIBUTES notificationMethod'"Lists the notificationMethod attribute from each storage cell in the DCLI group. This corrects the invalid LIST notificationmethod object into the supported CellCLI CELL attribute query.
dcli -g dbs_group -l root "adrci exec='show alert -tail -f'"Runs ADRCI alert-log tailing across database servers through DCLI. It streams current ADR alert output from each target, which is helpful during active incidents but can run until interrupted.
dcli -g dbs_group -l root "ip route show"Runs ip route show on every host in dbs_group to display the kernel routing table from each database server. Read-only; useful for comparing default routes, private network routes, or asymmetric network configuration.
dcli -g dbs_group -l root "nslookup <DB_NODE_VIP>"Runs nslookup for a database node VIP name from each database server. It checks DNS response consistency for VIP names, which is useful when RAC client failover or listener routing looks uneven.
dcli -g dbs_group -l root "systemctl list-units --type=service --state=running"Runs a systemd query across the database servers in dbs_group and lists services currently in the running state. It helps compare host service state during Exadata database-node triage without changing service configuration.
dcli -g cells_group -l celladmin "CellCLI -e list interconnect"Lists Exadata cell interconnect objects across the storage cells in a DCLI group. Use it to compare storage-network configuration and status during connectivity or performance investigations.
dcli -g cells_group -l celladmin "CellCLI -e list metricdefinition"Runs CellCLI LIST METRICDEFINITION on every cell in cells_group via DCLI, returning the catalog of cell metric names and meanings per cell. Read-only; use it to confirm the metric catalog is identical across cells or to look up a metric before querying METRICCURRENT.
dcli -l root -g ~/dbs_group "/usr/bin/ahfctl version -all"Runs ahfctl version -all across the database servers listed in dbs_group. It reports AHF and component versions without changing state, which helps spot diagnostics-tool drift across the rack.
dcli -g ib_switch_list -l root -kSets up SSH user equivalence as root across the InfiniBand switches listed in ib_switch_list. It modifies SSH authorization state so later DCLI operations can connect to the switch group without repeated password prompts.
dcli -c dm01cel01,dm01cel02,dm01cel03 cellcli -e list keyRuns CellCLI LIST KEY across three named storage cells through DCLI. The command is read-only but returns sensitive encryption key identifiers or key-assignment information, so handle the output carefully.
dcli -g dbs_group -l root "find /var/log -type f -name '*.log' -mtime -1 | head"Finds recently modified .log files under /var/log on every host in dbs_group and returns the first matches. Read-only; useful for locating active system logs before collecting details.
./dcli -g <GROUP_FILE> -l <USER> --vmstat="-a 3 5"Runs vmstat through DCLI on each target server and summarizes the sample output across the group. It is read-only and useful for a quick multi-host CPU, memory, swap, and I/O pressure check.
dcli -g dbs_group -l root "ss -tulpn"Runs the Linux ss socket listing across all hosts in dbs_group. It shows listening TCP/UDP sockets and owning processes, which helps compare unexpected listeners or port conflicts across database servers.
dcli -g dbs_group -l root "systemctl status chronyd --no-pager"Checks chronyd service status on every host in the database-server group. It is a read-only way to compare time-sync service state and recent status output across Exadata database servers.
dcli -g cells_group -l celladmin "CellCLI -e list metriccurrent where metricObjectName like '.*'"Runs a CellCLI current-metric query across the cells in a DCLI group, filtering by metricObjectName. It is read-only and useful for comparing current metric values across storage cells from one shell.
dcli -g dbs_group -l root "locate cellip.ora"Runs the locate command as root on every host in the dbs_group file to find the path(s) of cellip.ora, the file listing storage cell IP addresses each DB node uses. Read-only inspection across the rack; relies on the locate database (updatedb) being current.
dcli -g dbs_group -l root "orabasehome"Runs orabasehome across database servers to print each node's ORACLE_BASE_HOME path. It helps verify read-only Oracle Home layout and environment consistency across the database nodes.
dcli -g dbs_group -l root "adrci exec='show homes'"Runs ADRCI show homes on every host in dbs_group as root and returns the diagnostic homes known on each server. Read-only; useful before collecting ADR logs or comparing diagnostic layout across database nodes.
dcli -g cells_group -l celladmin "CellCLI -e list event -detail"Collects detailed CellCLI event records across the storage cells in a DCLI group. It helps compare hardware, service, or cell events across the rack during troubleshooting.
dcli -g dbs_group -l root "ls -ld /u01/app/oracle /u01/app/grid"Runs ls -ld for /u01/app/oracle and /u01/app/grid on every host in dbs_group. Read-only; it compares directory existence, ownership, permissions, and timestamps for the Oracle and Grid software parents.
dcli -g dbs_group -l root "nmcli dev status"Runs nmcli dev status on every host in dbs_group to show NetworkManager device state, type, connection, and management status. Read-only; useful for comparing interface status across database servers.
dcli -g dbs_group -l grid -f /home/grid/cellkey.ora -d /etc/oracle/cell/network-config/cellkey.oraPushes the local cellkey.ora file to /etc/oracle/cell/network-config/ on every host in dbs_group via DCLI's -f (source file) / -d (destination) options, as the grid owner. This is how the ASM/DB security key file is distributed for ASM-scoped or DB-scoped cell security; it writes a credential-bearing file to each node, so it must be the correct key and destination.
dcli -g cells_group -l celladmin "CellCLI -e LIST EVENT"Runs CellCLI LIST EVENT across the storage cells in the DCLI group. It provides a compact event inventory from multiple cells before drilling into LIST EVENT DETAIL or specific alert history entries.
dcli -g dbs_group -l root "whoami"Runs whoami across the database servers in dbs_group to confirm which OS account DCLI is using on each target. It is a small read-only access check before running commands where the remote user matters.
dcli -g ~/dbs_group -l root '/opt/oracle.SupportTools/asrexacheck'Runs the ASR (Auto Service Request) validation script asrexacheck as root on every host in dbs_group via DCLI, checking that ASR trap routing and configuration are correct on each node. Read-only diagnostic; it validates the ASR setup and changes nothing.
dcli -g /opt/oracle.SupportTools/onecommand/ib_group -l root showfruinfo | grep -a Sun_Serial_NumberRuns showfruinfo across the hosts in the InfiniBand switch group file and filters for Sun_Serial_Number values. It is a read-only inventory command for rack or switch serial evidence, but it executes on every host listed in the DCLI group file.
dcli -g ~/dom0_group -l root "ls -1 /EXAVMIMAGES/System.first.boot*.img"Lists System.first.boot image files under /EXAVMIMAGES across the management-domain group. These files are used in Exadata VM and KVM host procedures, where the image file version must match the host image level.
dcli -g mycells -f '*.bin'Copies files matching the quoted *.bin pattern to every target listed in the mycells group file using DCLI file-copy mode. It writes files to remote cells, so the pattern, current directory, destination behavior, and target list must be checked.
./dcli -g mycells -x reConfig.sclRuns the commands in the local reConfig.scl script against every target in the mycells DCLI group. The operational effect depends on the script contents; DCLI distributes whatever commands the file contains.
Collect diagnostics
dcli -g dbs_group -l root "du -sh /u01/app/oracle/diag 2>/dev/null"Reports the size of the Oracle diagnostic directory on each database server in the DCLI group. It is a quick way to spot nodes accumulating large ADR trace, alert, or incident files.
dcli -g dbs_group -l root -n "dbmcli -e 'ALTER DBSERVER VALIDATE SNMP TYPE=ASR'"Runs DBMCLI ALTER DBSERVER VALIDATE SNMP TYPE=ASR across database servers through DCLI. The command validates ASR/SNMP alert delivery configuration and may generate validation traffic or test notifications.
dcli -g dbs_group -l root "du -sh /u01/app/grid/diag 2>/dev/null"Runs du -sh against /u01/app/grid/diag on every host in dbs_group and suppresses permission or missing-path errors. Read-only; use it to compare Grid Infrastructure diagnostic space usage across nodes.
dcli -l root -g ~/dbs_group "/usr/bin/exachk -v"Runs EXAchk with the version flag on every host listed in dbs_group. It is a read-only way to compare installed EXAchk/AHF levels across Exadata database servers before a health check or patching window.
Start, stop and move
dcli -g cell_group -l root "cellcli -e 'ALTER CELL STARTUP SERVICES CELLSRV'"Runs CellCLI ALTER CELL STARTUP SERVICES CELLSRV across the cells in cell_group. It starts the CELLSRV service on targeted storage cells and is typically used during flash cache or storage-cell maintenance workflows.
dcli -g cell_group -l root "cellcli -e 'ALTER CELL SHUTDOWN SERVICES ALL'"Runs CellCLI ALTER CELL SHUTDOWN SERVICES ALL across the storage cells in a DCLI group. This stops cell services on every targeted storage cell and can interrupt database I/O if not coordinated correctly.
dcli -l root -g cell_group shutdown -h nowPowers off every host listed in the group file simultaneously by running 'shutdown -h now' as root via DCLI. Destructive to availability: it halts all targeted cells/nodes at once, taking storage or the cluster offline, only run in a planned outage with the correct group file.
dcli -g nodes_to_be_erased -l root "reboot"Runs reboot as root on every host listed in the nodes_to_be_erased DCLI group. This is a disruptive multi-node action suitable only inside a controlled reprovisioning, decommissioning, or maintenance procedure.
dcli -g ~/dbs_group -l root umount /<zfs_mount>Runs the same OS command (here, unmounting an NFS/ZFS mount) as root on every host listed in the group file ~/dbs_group, in one parallel pass. This is a state-changing remote operation: unmounting a busy filesystem can break backups, dumps, or any process using that path on each node.
Create and change
dcli -g cell_group -l root "cellcli -e 'ALTER FLASHCACHE ALL FLUSH'"Runs CellCLI ALTER FLASHCACHE ALL FLUSH across the cells in cell_group. It writes dirty flash cache data back to grid disks and is normally part of flash cache mode or maintenance procedures.
dcli -l root -g cell_group cellcli -e "CREATE FLASHCACHE ALL"Runs CellCLI CREATE FLASHCACHE ALL on every storage cell in the DCLI group. It creates Smart Flash Cache on eligible flash cell disks and changes flash-cache configuration across the target cells.
./dcli -g mycells -l root -t "cellcli -e alter iormplan active"Runs a CellCLI ALTER IORMPLAN active command across the cells in the DCLI group. This changes Exadata storage resource-management behavior across multiple cells, so it is an operational change rather than a diagnostic query.
dcli -l root -g /root/dbs_group "cp cellip.ora orig_cellip.ora"Creates a backup copy of cellip.ora as orig_cellip.ora on each database server in /root/dbs_group. It is used during InfiniBand or cell network configuration procedures before editing cell network configuration files.
dcli -l root -g cell_group cellcli -e "CREATE PMEMCACHE ALL"Runs CellCLI CREATE PMEMCACHE ALL across the storage cells in cell_group. It creates PMEM cache resources on all available PMEM cell disks on each target cell and is used in documented cache mode or replacement procedures.
dcli -g cells cellcli -e 'ALTER SOFTWAREUPDATE time="1 AM Thursday"'Runs CellCLI ALTER SOFTWAREUPDATE through DCLI for every host in the cells group, setting the scheduled software update time. This is a distributed configuration change, not a read-only comparison command.
dcli -g dbs_group -l root chown grid:oinstall /etc/oracle/cell/Changes ownership of /etc/oracle/cell on every host in the dbs_group file to grid:oinstall. This is a multi-host permission change on Exadata cell configuration paths, so a wrong target group or ownership value can break access patterns across database servers.
dcli -g dba1_group -l oradba1 "chmod 600 $ORACLE_HOME/admin/db_unique_name/*"Changes permissions to 600 (owner read/write only) on files under the database's admin directory on every host in dba1_group via DCLI, as the oradba1 owner. This writes filesystem metadata on multiple nodes at once; over-restrictive or wrong-target permissions can break tooling that reads those files, so verify the group and path first.
dcli -g dbs_group -l grid chmod 640 /etc/oracle/cell/network-config/Runs chmod 640 on /etc/oracle/cell/network-config/ across the hosts listed in dbs_group as the grid user. This changes file-system permissions on an Exadata network configuration path, so a bad group file or path can make the change rack-wide.
dcli -l root -g cell_group cellcli -e "ALTER PMEMCACHE ALL FLUSH"Runs the CellCLI PMEM cache flush command on every storage cell listed in cell_group. It flushes WriteBack PMEM cache contents before PMEM cache maintenance, so the impact is multiplied across all targeted cells.
Remove and drop
dcli -l root -g cell_group cellcli -e "DROP FLASHCACHE"Runs CellCLI DROP FLASHCACHE on every storage cell in the DCLI group. It removes Smart Flash Cache objects from the target cells and can materially degrade performance until flash cache is recreated.
dcli -g cell_group -l root cellcli -e DROP FLASHCACHERuns CellCLI DROP FLASHCACHE across every storage cell in the DCLI group. This removes flash cache objects and is used only in controlled maintenance workflows such as flash cache mode changes or cell storage work.
dcli -g cell_group -l root "cellcli -e DROP PMEMCACHE ALL"Runs CellCLI DROP PMEMCACHE ALL across the storage cells listed in the DCLI group. This removes persistent memory cache configuration or contents rack-wide instead of on a single cell, so it is a coordinated maintenance action rather than a diagnostic check.