CRSCTL commands for Exadata
210 commands, grouped by what they do.
Check status and configuration
crsctl stat res -tDisplays Clusterware resource target and state information in a compact table. Read-only output is one of the fastest ways to see which databases, services, listeners, disk groups, or other resources are online and where they are running.
crsctl check crsChecks the local Oracle Clusterware stack and reports whether core CRS components are online. Read-only command used as a quick health check before resource-level troubleshooting.
crsctl stat res -t -initDisplays Clusterware init or OHASD-managed resources in table form. Read-only output helps separate local high-availability stack resource state from normal cluster resource state.
crsctl query crs releaseversionDisplays the Oracle Clusterware release version for the active CRS stack. Read-only output helps confirm the running release during patching checks or version-alignment triage.
crsctl status resource -tDisplays the runtime state of all Oracle Clusterware resources in a tabular (-t) view, target vs. current state, the node each resource runs on, and resource type. Read-only; the standard first look at cluster health before starting, stopping, or relocating resources.
crsctl check cluster [-all | -n <server_name> ...]Checks the Oracle Clusterware stack status for the local cluster or selected servers. It reports whether CRS, CSS, and related cluster services are online without changing state.
crsctl check cluster -allChecks the Oracle Clusterware stack health across all nodes in the cluster. It is a read-only status command used to confirm whether cluster services are online before or after maintenance.
crsctl query crs softwareversionDisplays the Oracle Clusterware software version for the Grid Infrastructure installation. Read-only output helps compare installed software level with the active release version during patch checks.
crsctl query css ipmiconfigShows whether Cluster Synchronization Services is configured to use IPMI integration for node restart or fencing behavior. It is read-only Clusterware metadata inspection.
crsctl config hasDisplays the current configuration for Oracle High Availability Services configuration. It is read-only and useful for confirming Oracle Restart or Clusterware setup before changes.
crsctl config crsDisplays the current configuration for crs. It is read-only and useful for confirming Oracle Restart or Clusterware setup before changes.
ocrconfig -backuploc /u01/app/ocr-backupChanges the directory where Oracle Clusterware writes automatic OCR (Oracle Cluster Registry) backups. Writes a configuration change that affects where future OCR backups land; the existing OCR is untouched, but recovery readiness depends on the new path being valid and shared across nodes.
crsctl query css votediskDisplays the voting disk configuration used by Cluster Synchronization Services. It is read-only and helps verify quorum storage visibility during RAC and Grid Infrastructure diagnostics.
crsctl query crs activeversionDisplays the active Oracle Clusterware version for the cluster. It is read-only and is especially useful during rolling upgrades, patching, and version-alignment checks.
crsctl status resourceDisplays status information for Oracle Clusterware resources. Read-only command used as a general CRS resource inventory before drilling into a specific resource, type filter, or detailed attribute view.
crsctl status resource | grep -i "ora.*.db"Lists Clusterware resources and filters the output to likely database resources using grep. It is read-only shell filtering around CRSCTL status output, useful when a compact list is faster than full resource detail.
crsctl status resource -t -initShows a tabular status view of init-level Oracle Clusterware resources. Read-only command used for quick checks of local high availability services and early Clusterware components.
crsctl status resource | grep -A 4 "ora.*.lsnr"Lists Clusterware resources and filters listener-related rows plus following context lines. It is read-only shell filtering around CRSCTL status output for quick listener resource checks.
crsctl query crs softwarepatch [<host_name>]Returns the current value or metadata for CRS software patch level. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status resource -w "TYPE = ora.database.type"Lists Clusterware resources whose type is ora.database.type, filtering the resource inventory to RAC database resources. It is read-only and useful for checking which databases Clusterware currently knows about.
crsctl check cssChecks whether Cluster Synchronization Services is running and reachable from the local Grid Infrastructure environment. Read-only command used to confirm CSS health during cluster membership or eviction triage.
crsctl check ctssChecks the Oracle Cluster Time Synchronization Service status for the cluster. It is a read-only health check used to confirm CTSS behavior during RAC and Grid Infrastructure troubleshooting.
crsctl get css misscountDisplays the configured Cluster Synchronization Services misscount value, the timeout used by CSS for node-miss detection. It is a read-only Grid Infrastructure check commonly used before cluster troubleshooting or patching decisions.
crsctl status resource -w "TYPE = ora.asm.type"Lists Clusterware resources whose type is ora.asm.type, filtering the resource inventory to ASM resources. It is read-only and useful before ASM, disk group, or database dependency troubleshooting.
crsctl status resource <RESOURCE_NAME> -fDisplays full status and attribute details for a specific Oracle Clusterware resource. Read-only command used to inspect target state, current state, hosting node, dependencies, and resource properties.
crsctl query crs releasepatchReturns the current value or metadata for CRS release patch level. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl stat res | grep -A 4 "ora.*.dg"Lists Oracle Clusterware resources and filters for disk group resources, including four lines of following context.
crsctl status resource -w "TYPE = ora.listener.type"Filters Oracle Clusterware resources to listener-type resources. Read-only command used to find listener resources known to CRS before checking placement, state, or attributes.
crsctl check evmChecks whether the Oracle Event Manager component is running in the Clusterware stack. Read-only output helps isolate event-manager problems from broader CRS or CSS failures.
crsctl get cluster nameDisplays the Oracle Clusterware cluster name known to the local Grid Infrastructure installation. Read-only identity check used to confirm that commands are being run against the intended cluster.
crsctl status resource -w "TYPE = ora.service.type"Filters Oracle Clusterware resources to service-type resources. Read-only command used to find CRS-managed services before checking placement, status, dependencies, or resource attributes.
crsctl status resource ora.asm -pDisplays configured properties for the Clusterware ASM resource ora.asm. It is a read-only check used to inspect ASM resource attributes, dependencies, placement, and management policy before taking any Clusterware action.
crsctl query css misscountQueries the Cluster Synchronization Services misscount setting, the heartbeat tolerance used in cluster membership decisions. Read-only output can help explain eviction timing, but the exact command was not found in the local 19c/26ai lookup corpus.
crsctl status resource ora.cssd -pDisplays configured profile attributes for the Cluster Synchronization Services daemon resource. Read-only command used to inspect CSSD resource configuration when cluster membership or startup is under review.
crsctl get css disktimeoutDisplays the configured CSS disk timeout value from Clusterware metadata. It is read-only and helps explain node membership, voting disk, or storage-latency behavior.
crsctl status serverDisplays Oracle Clusterware server status information for the cluster. Read-only command used to inspect cluster node visibility and server state before resource or server-pool operations.
crsctl get hostnameDisplays the hostname value known to CRSCTL for the local environment. It is a read-only identity check used before deeper Clusterware, node membership, or configuration troubleshooting.
crsctl get nodenameDisplays the node name known to Oracle Clusterware for the local server. Read-only identity check used when correlating OS hostnames, Clusterware node names, and resource placement.
crsctl status resource ora.crsd -pDisplays the configured profile attributes for the Cluster Ready Services daemon resource. Read-only command used to inspect CRSD resource metadata during Clusterware startup or stack troubleshooting.
crsctl status serverpoolDisplays Oracle Clusterware server pool status. It is read-only and helps confirm placement capacity, policy-managed cluster layout, and server pool state.
crsctl check hasChecks the current status of Oracle High Availability Services configuration managed by Oracle Clusterware. It is read-only and returns whether the target is reachable, configured, or healthy depending on the object.
crsctl check resource {<resource_name> [...] | -w "<filter>"} [-n <node_name>] [-k <cardinality_id>] [-d <degree_id>]Checks the current status of Oracle Clusterware resource managed by Oracle Clusterware. It is read-only and returns whether the target is reachable, configured, or healthy depending on the object.
crsctl status server -fDisplays the status of cluster server nodes in full (-f) detail, state, active/configured pools, and server attributes. Read-only; used to inspect node-level placement and server pool membership during RAC/policy-managed troubleshooting.
crsctl status resource ora.evmd -pDisplays configured profile attributes for the Oracle Event Manager daemon resource. Read-only command used to inspect EVMD resource configuration during Clusterware startup or event-service troubleshooting.
crsctl query driver activeversion -allShows the active Oracle ACFS driver version on all nodes in the cluster. Read-only command used to compare loaded ACFS driver versions during upgrade, patching, or compatibility checks.
crsctl getperm resource <RESOURCE_NAME>Displays the permission settings for a Clusterware resource. It is read-only and helps explain which users or roles can inspect or operate the resource.
crsctl get cluster hubsizeReturns the current value or metadata for Flex Cluster hub node limit. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctlInvokes CRSCTL without a subcommand to display command usage and available Oracle Clusterware control operations.
crsctl lsmodules cssLists available CRSCTL debug modules for Cluster Synchronization Services. This read-only command helps identify valid module names before enabling Clusterware tracing with a separate command.
crsctl status serverpool -fDisplays full status details for Clusterware server pools. Read-only command used to inspect server-pool configuration and placement before policy-managed database or resource work.
crsctl unpin css -n <node_name>Unpins a node in Cluster Synchronization Services metadata. This changes cluster node metadata and is typically used only during controlled cluster node maintenance or reconfiguration.
crsctl status resource ora.diskmon -pDisplays configured properties for the Clusterware disk monitor resource. It is read-only and helps confirm resource attributes before troubleshooting disk monitoring, ASM, or Clusterware dependency behavior.
crsctl get cluster configurationReturns the current value or metadata for cluster configuration. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get cluster mode [config | status]Returns the current value or metadata for cluster mode. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get node role {config | status} [node <node_name> | -all]Returns the current value or metadata for node role. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get server css_criticalReturns the current value or metadata for server CSS critical flag. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl setperm resource <resource_name> {-u <acl_string> | -x <acl_string> | -o <user_name> | -g <group_name>}Changes permissions or ownership for a Clusterware resource ACL or ownership entry. This updates Clusterware access control metadata, so it affects who can administer the object.
crsctl get css clusterguidDisplays the Cluster Synchronization Services cluster GUID for a Grid Infrastructure cluster. Read-only identity output is useful when matching cluster metadata to database, storage, or Exascale path references.
crsctl lsmodules crsLists the CRS component debug modules available to CRSCTL. The command is read-only and is mainly used to choose the correct module name before enabling Clusterware tracing.
crsctl query calog [-aftertime "<timestamp>"] [-beforetime "<timestamp>"] [-days "<number_of_days>"] [-duration "<time_interval>" | -follow] [-filter "<filter_expression>"] [-processname "<writer_process>"] [-processid "<writer_process_id>"] [-node "<entity_hostname>"] [-fullfmt | -xmlfmt]Queries the Oracle Clusterware activity log with optional time, node, process, and format filters. It is read-only and useful for investigating planned or unplanned Clusterware actions.
crsctl query crs administratorReturns the current value or metadata for CRS administrator entry. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status type [<resource_type_name> [...] | -w "<filter>"] [-g] [-p] [-f] [-r]Displays status or configuration details for a Clusterware resource type ACL or ownership entry. It is read-only and is useful for checking Clusterware state before making changes.
crsctl query driver softwareversion -allDisplays the available Oracle Grid Infrastructure software version for cluster drivers such as ACFS across nodes. Read-only output is useful when checking driver version alignment after GI patching or ACFS work.
crsctl get cluster extendedReturns the current value or metadata for extended-cluster setting. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get css ipmiaddrReturns the current value or metadata for CSS IPMI address. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl getperm type <resource_type> [-u <user_name>] | -g <group_name>Displays permissions granted on Oracle Clusterware resource type for a user or group. It is read-only and helps confirm who can operate the Clusterware object.
crsctl query crs autostartReturns the current value or metadata for CRS automatic-start setting. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl eval fail resource {<resource_name> | -w "<filter>"} [-n <server>] [-env "<attr>=<val>[,...]"]Predicts the effect of a CRSCTL fail operation on Oracle Clusterware resource without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl query has softwareversion [<server_name>]Returns the current value or metadata for Oracle Restart software version. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status policy [<policy_name> [...]] | -w "<filter>" | -active]Displays status or configuration details for Clusterware policies. It is read-only and is useful for checking Clusterware state before making changes.
crsctl get tracefileopts <module_name>Returns the current value or metadata for CRS trace-file options. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status category {<category_name> [<category_name> [...]] | [-w "<filter>" | -server <server_name>]}Displays status or configuration details for Clusterware resource categories. It is read-only and is useful for checking Clusterware state before making changes.
crsctl get cluster typeReturns the current value or metadata for cluster type. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl pin css -n <NODE_NAME>Pins one or more nodes in Cluster Synchronization Services so the node keeps a stable node number assignment. This changes Clusterware CSS metadata and is used for specific cluster membership or ASM compatibility procedures.
crsctl lsmodules evmLists the CRSCTL debug modules available for the Oracle Event Manager service. Read-only command used to identify valid tracing module names before enabling Clusterware diagnostics.
crsctl get cluster tlsciphersuite [disabled|all]Returns the current value or metadata for cluster TLS cipher-suite configuration. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get cpu equivalencyReturns the current value or metadata for CPU equivalency value. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get crs drainReturns the current value or metadata for CRS drain setting. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get resource useReturns the current value or metadata for resource-use accounting flag. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl query cluster site {<site_name> | -all}Returns the current value or metadata for extended-cluster site. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl query css ipmideviceReturns the current value or metadata for CSS IPMI device. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl query has releaseversionReturns the current value or metadata for Oracle Restart release version. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status resourcegroup [<group_name> [...] | -w "<filter>"] [-p [-attr "<attribute_name>=<attribute_value>" [-noname]] | -v [-attr "<attribute_name>=<attribute_value>"] [-noname]]] | [-f] [-l] [-g] | [[-k <cid> | -n <server_name>] [-e [-p | -v]]] [-s -k <cid>] | -noauto]]Displays status or configuration details for a Clusterware resource group. It is read-only and is useful for checking Clusterware state before making changes.
crsctl get cluster classReturns the current value or metadata for cluster class. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get ipmi binarylocReturns the current value or metadata for IPMI tool binary location. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl getperm serverpool <server_pool_name> [-u <user_name> | -g <group_name>]Displays permissions granted on server pool for a user or group. It is read-only and helps confirm who can operate the Clusterware object.
crsctl query dns -name <name> [-dnsserver <DNS_server_address>] [-type <query_type>] [-port <port>] [-attempts <number_of_attempts>] [-timeout <timeout_in_seconds>] [-v]Runs a DNS lookup through CRSCTL with optional DNS server, query type, retry, timeout, and verbose settings. It is read-only and helps validate name resolution from a Clusterware context.
crsctl request action <action_name> {-r <resource_name> [...] | -w "<filter>"} [-env "<env1>=<val1>,<env2>=<val2>,..."] [-i]Requests a named action against one or more Clusterware resources selected by name or filter. The effect depends on the action implementation and environment variables passed to the resource action.
crsctl unset css <parameter>Unsets a Cluster Synchronization Services parameter. This removes a Clusterware configuration value and may affect cluster behavior after the change takes effect.
crsctl check resourcegroup {<group_name> [...] | -w "<filter>"} [-n <server_name>] [-k <cid>]Checks the current status of Oracle Clusterware resource group managed by Oracle Clusterware. It is read-only and returns whether the target is reachable, configured, or healthy depending on the object.
crsctl get css noautorestartReturns the current value or metadata for CSS automatic restart setting. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl query crs site {-n host_name | -d disk_name}Returns the current value or metadata for CRS site mapping. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status ip -A {<IP_name> | <IP_address>}Displays status or configuration details for a Clusterware-managed IP resource. It is read-only and is useful for checking Clusterware state before making changes.
crsctl status policyset [-file <file_name>]Displays status or configuration details for the Clusterware policy set. It is read-only and is useful for checking Clusterware state before making changes.
crsctl setperm type <resource_type_name> {-u <acl_string> | -x <acl_string> | -o <user_name> | -g <group_name>}Changes permissions or ownership for a Clusterware resource type ACL or ownership entry. This updates Clusterware access control metadata, so it affects who can administer the object.
crsctl eval activate policy <policy_name> [-f] [-admin [-l serverpools | resources | all] [-x] [-a]] [-explain]Predicts the effect of a CRSCTL activate operation on Oracle Clusterware policy without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl get restricted placementReturns the current value or metadata for restricted-placement policy. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl query socket udp [-address <address>] [-port <port>]Queries UDP socket reachability for an optional address and port. It is read-only and helps validate network socket behavior used by Clusterware components.
crsctl query wallet -type <wallet_type> [-name <name>] [-user <user_name>] [-all]Returns the current value or metadata for Oracle Clusterware wallet. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl setperm serverpool <server_pool_name> {-u <acl_string> | -x <acl_string> | -o <user_name> | -g <group_name>}Changes permissions or ownership for a server pool ACL or ownership entry. This updates Clusterware access control metadata, so it affects who can administer the object.
crsctl discover dhcp -clientid <clientid> [-port <port>] [-subnet <subnet>]Discovers DHCP information for the specified client identifier and optional network details. It is a read-only probe used to confirm DHCP reachability before requesting or releasing a lease.
crsctl eval fail resourcegroup {<group_name> | -w <filter>} [-n <server>] [-env "<attr>=<val>[,...]"]Predicts the effect of a CRSCTL fail operation on Oracle Clusterware resource group without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl get clientid dhcp -cluname <cluster_name> -viptype <vip_type> [-vip <vip_res_name>] [-n <node_name>]Returns the current value or metadata for DHCP client identifier. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl get server labelReturns the current value or metadata for server label. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl query member_cluster_configuration [<member_cluster_name>]Returns the current value or metadata for member cluster configuration. It is read-only and helps verify the Clusterware setting before changing it or while troubleshooting.
crsctl status testdns [-server <DNS_server_address>] [-port <port>] [-v]Displays status or configuration details for the Clusterware DNS test service. It is read-only and is useful for checking Clusterware state before making changes.
crsctl unset css ipmiconfigUnsets the CSS IPMI fencing configuration. This removes a Clusterware configuration value and may affect cluster behavior after the change takes effect.
crsctl release dhcp -clientid <clientid> [-port <port>]Releases a DHCP lease for the specified client identifier and optional port. It changes DHCP lease state and is used as part of cluster network address management.
crsctl request dhcp -clientid <clientid> [-port <port>]Requests a named action against one or more Clusterware resources selected by name or filter. The effect depends on the action implementation and environment variables passed to the resource action.
Start, stop and move
crsctl stop crsStops Oracle Clusterware services on the local server. This can stop local cluster-managed resources and affect database, ASM, listener, or service availability on that node.
crsctl start crsStarts the Oracle Clusterware stack on the local node and brings Clusterware-managed components under CRS control. It can trigger resource starts and dependency processing on that node.
crsctl stop crs -fForcibly stops Oracle High Availability Services and Cluster Ready Services on the local server. The -f option unconditionally stops resources managed by Oracle Clusterware, which can interrupt databases, ASM, listeners, and services on that node.
crsctl stop clusterStops the Oracle Clusterware stack on cluster nodes according to the command scope and options in use. This is a state-changing operation that can stop or relocate cluster-managed databases, listeners, services, and storage resources.
crsctl start cluster -allStarts the Oracle Clusterware stack across all cluster nodes from the Grid Infrastructure environment. This changes cluster runtime state and may bring dependent resources online.
crsctl stop cluster -allStops Oracle Clusterware across all cluster nodes, which stops or relocates Clusterware-managed resources according to their dependencies and state. This is an outage-level maintenance command for the cluster stack.
crsctl start resource <RESOURCE_NAME>Starts the specified Oracle Clusterware resource and lets Clusterware enforce its configured dependencies and placement rules. It can bring application, database, listener, or custom resources online.
crsctl enable crsEnables Oracle Clusterware/CRS to start automatically on the local server. This changes Grid Infrastructure startup behavior and is commonly used after maintenance or recovery steps that disabled CRS.
crsctl stop resource <RESOURCE_NAME>Stops a specific Oracle Clusterware-managed resource. This changes runtime state and can affect dependent databases, services, listeners, file systems, or other resources.
crsctl relocate resource <RESOURCE_NAME> -n <TARGET_NODE>Relocates a Clusterware-managed resource to the specified target node. This changes runtime placement and can interrupt clients if the resource supports services or dependencies that move with it.
crsctl start crs [-excl [-nocrs] | -wait]Starts Oracle High Availability Services on the local server and waits until the start operation completes.
crsctl disable crsDisables automatic startup of the Oracle Clusterware stack on the local server after reboot. It changes CRS startup behavior and is commonly used before host-level maintenance that must not immediately restart Clusterware.
crsctl start rollingpatchStarts the cluster rolling patch state. It brings the targeted Clusterware component online or begins the requested rolling operation.
crsctl stop rollingpatchStops the cluster rolling patch state. This can take the targeted Clusterware component offline or end the requested diagnostic or rolling operation.
crsctl stop has -fForcibly stops Oracle High Availability Services on a standalone or Oracle Restart server. This can stop ASM, database, listener, and ACFS resources managed by the local HA stack.
crsctl start has [-nowait] [-noautostart] [-wait]Starts Oracle High Availability Services on the local server. It brings the targeted Clusterware component online or begins the requested rolling operation.
crsctl restart resource {<resource_name> [...] | -w "<filter>"} [-k <cid>] [-d <did>] [-env "<env1>=<val1>,<env2>=<val2>,..."] [-i] [-f]Restarts the specified Oracle Clusterware resource objects through Oracle Clusterware. The command stops and starts affected resources, so dependent services may experience interruption.
crsctl eval stop resource <resource_name>Evaluates whether Oracle Clusterware can stop the specified resource without actually stopping it. Use it to check placement, dependency, and policy effects before issuing the real stop command.
crsctl start rollingupgrade <version>Starts the cluster rolling upgrade state. It brings the targeted Clusterware component online or begins the requested rolling operation.
crsctl eval start resource <RESOURCE_NAME>Evaluates whether Oracle Clusterware would be able to start the specified resource without actually starting it. It is a planning and dependency-check command for resource placement and prerequisite issues.
crsctl disable hasDisables Oracle High Availability Services configuration. This changes whether the local Oracle High Availability Services stack starts automatically as configured.
crsctl relocate server <server_name> [...] -c <server_pool_name> [-i] [-f]Relocates online Oracle Clusterware server object from a source placement to another eligible server or pool. Oracle Clusterware stops and starts affected managed resources as needed to complete the relocation.
crsctl set crs drain {[enable {true|false}] [draintimeout <drain_timeout_in_seconds>] [maxdraintimeout <maximum_drain_timeout_in_seconds>]}Sets the Clusterware value for CRS drain setting. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl enable hasEnables Oracle High Availability Services configuration. This changes whether the local Oracle High Availability Services stack starts automatically as configured.
crsctl eval relocate resource {<resource_name> | -all} {-s <source_server> | -w "<filter>"} [-n <destination_server>] [-f]Predicts the effect of a CRSCTL relocate operation on Oracle Clusterware resource without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl start testdns [-address <address> [-port <port>]] [-once] [-v]Starts the Clusterware DNS test service. It brings the targeted Clusterware component online or begins the requested rolling operation.
crsctl relocate resourcegroup {<group_name> [...] [-k <cid>] | -all | -w "<filter>"} [-env "<attr>=<val>[,...]"] [-f] [-i]Relocates online Oracle Clusterware resource group from a source placement to another eligible server or pool. Oracle Clusterware stops and starts affected managed resources as needed to complete the relocation.
crsctl start ip -A {<IP_name> | <IP_address>}/<netmask>/<interface_name>Starts a Clusterware-managed IP resource. It brings the targeted Clusterware component online or begins the requested rolling operation.
crsctl start resourcegroup {<group_name> [...] | -w "<filter>"] | -all} [-n <server_name> | -s <server_pool>] [-k <cid>] [-env "<attr>=<val>[,..."]] [-f] [-i] [-l]Starts a Clusterware resource group. It brings the targeted Clusterware component online or begins the requested rolling operation.
crsctl stop resourcegroup {<group_name> [...] | -w "<filter>"] | -all} [-n <server_name> | -s <server_pool>] [-k <cid>] [-env "<attr>=<val>[,...]"] [-f] [-i] [-l]Stops a Clusterware resource group. This can take the targeted Clusterware component offline or end the requested diagnostic or rolling operation.
crsctl eval relocate resourcegroup {<group_name> | -all | -w "<filter>"} {-s <source_server> | -w "<filter>"} -n <destination_server> [-f]Predicts the effect of a CRSCTL relocate operation on Oracle Clusterware resource group without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl eval relocate server <server_name> -to <server_pool_name> [-f] [-admin [-l <level>] [-x] [-a]]Predicts the effect of a CRSCTL relocate operation on Oracle Clusterware server object without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl eval start resourcegroup {<group_name> | -w <filter>} [-n <server>] [-f]Predicts the effect of a CRSCTL start operation on Oracle Clusterware resource group without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl restart resourcegroup {<group_name> [...] | -w "<filter>"} [-k <cid>] [-env "<env1>=<val1>,<env2>=<val2>,..."] [-f] [-i]Restarts the specified Oracle Clusterware resource group objects through Oracle Clusterware. The command stops and starts affected resources, so dependent services may experience interruption.
crsctl stop ip -A {<IP_name> | <IP_address>}/<interface_name>Stops a Clusterware-managed IP resource. This can take the targeted Clusterware component offline or end the requested diagnostic or rolling operation.
crsctl eval stop resourcegroup {<group_name> | -w <filter>} [-f]Predicts the effect of a CRSCTL stop operation on Oracle Clusterware resource group without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl stop testdns [-address <address>] [-port <port>] [-v]Stops the Clusterware DNS test service. This can take the targeted Clusterware component offline or end the requested diagnostic or rolling operation.
Create and change
crsctl replace votedisk +<DISKGROUP_NAME>Replaces the Oracle Clusterware voting files and places them in the specified ASM disk group. This changes quorum storage metadata and can affect cluster survivability if the target disk group is wrong or unavailable.
crsctl add resource <resource_name> -type <resource_type> [-group <group_name> [-file <file_path> | -attr "<attribute_name>=<attribute_value>[,...]"] [-i] [-f]Creates or registers Oracle Clusterware resource in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl set css <parameter> <value>Sets the Clusterware value for css. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl replace discoverystring "<absolute_path>[,...]"Replaces the ASM discovery string stored for Oracle Clusterware. This changes how Clusterware discovers ASM disks and should match the intended storage path list exactly.
crsctl set cluster mode flexSets the Clusterware value for cluster mode. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl set server css_critical {yes | no}Sets the Clusterware value for server CSS critical flag. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl add crs administrator -u <user_name> [-f]Creates or registers CRS administrator entry in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl add serverpool <server_pool_name> {-file <file_path> | -attr "<attr_name>=<attr_value>[,...]"} [-i] [-f]Creates or registers server pool in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl set css ipmiaddr <ip_address>Sets the Clusterware value for CSS IPMI address. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl add wallet -type <wallet_type> [-name <name>] [-user <user_name> -passwd]Creates or registers Oracle Clusterware wallet in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl modify server <server_name> -attr "<attr_name>=<attr_value>[,...]"Changes attributes of Oracle Clusterware server object in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl set crs autostart [delay <delay_time>] [servercount <count>]Sets the Clusterware value for CRS automatic-start setting. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl modify serverpool <server_pool_name> -attr "<attr_name>=<attr_value>[, ...]" [-policy <policyName> | -all_policies] [-i] [-f]Changes attributes of server pool in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl modify wallet -type <wallet_type> [-name <name>] [-user <user_name> -passwd]Changes attributes of Oracle Clusterware wallet in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl eval add resource <resource_name> -type <resource_type> [-file <file_path> | -attr "<attribute_name>=<attribute_value>[,...]"]] [-group <group_name>] [-f]Predicts the effect of a CRSCTL add operation on Oracle Clusterware resource without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl eval modify resource <resource_name> -attr "<attribute_name>=<attribute_value>[,...]" [-group <group_name>] [-f]Predicts the effect of a CRSCTL modify operation on Oracle Clusterware resource without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl set tracefileopts <module_name> [-filesize <file_size>[K|k|M|m|G|g]] [-numsegments <number_of_segments>]Sets the Clusterware value for CRS trace-file options. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl add category <category_name> [-attr "<attr_name>=<attr_value> [,<attr_name>=<attr_value>[,...]]"] [-i]Creates or registers cluster resource category in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl add cluster site <site_name> [-guid <site_guid>]Creates or registers extended-cluster site in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl add policy <policy_name> -attr "<attr_name>=<attr_value>[,<attr_name>=<attr_value>[, ...]]"Creates or registers Oracle Clusterware policy in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl add type <type_name> -basetype <base_type_name> {-attr "ATTRIBUTE=<attribute_name>,TYPE={string|int}[,DEFAULT_VALUE=<default_value>][,FLAGS=<type_flags>]" | -file <file_path>} [-i]Creates or registers Oracle Clusterware resource type in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl create policyset -file <path_to_file>Creates or registers Oracle Clusterware policy set in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl set cpu equivalency <number>Sets the Clusterware value for CPU equivalency value. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl set resource use [1 | 0]Sets the Clusterware value for resource-use accounting flag. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl export resourcegroup [<group_name> [...]] -file <file_name>Exports the definition of one or more Oracle Clusterware resource group objects to a file. It does not change the resource group itself, but it writes configuration data that can be reused for review or migration.
crsctl add resourcegroup <group_name> -type <group_type> [[-file <file_path>] | [-attr "<attribute_name>= <attribute_value>"]] [-f] [-i]Creates or registers Oracle Clusterware resource group in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl modify policy <policy_name> -attr "<attr_name>=<attr_value>"Changes attributes of Oracle Clusterware policy in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl set css ipmiadmin <ipmi_administrator_name>Sets the Clusterware value for css ipmiadmin. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl set css noautorestart {all | interconnect | vf | none}Sets the Clusterware value for CSS automatic restart setting. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl eval add resourcegroup <group_name> -type <group_type> [-file <file_path> | -attr "<attribute_name>=<attribute_value>[,...]"] [-f]Predicts the effect of a CRSCTL add operation on Oracle Clusterware resource group without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl eval add server <server_name> [-file <file_path>] | [-attr "<attr_name>=<attr_value>[,...]"] [-admin [-l <level> [-x] [-a]] [-explain]Predicts the effect of a CRSCTL add operation on Oracle Clusterware server object without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl eval add serverpool <server_pool_name> [-file <file_path> | -attr "<attr_name>=<attr_value>[,...]"] [-admin [-l <level> [-x] [-a]] [-explain] [-f]Predicts the effect of a CRSCTL add operation on server pool without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl eval modify serverpool <server_pool_name> {-file <file_path> | -attr "<attr_name>=<attr_value>[,...]]"} [-f] [-admin [-l <level> [-x] [-a]] [-explain]Predicts the effect of a CRSCTL modify operation on server pool without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl modify cluster site <site_name> {-n <node1, node2, ...> | -s {rejuvenate | quarantine} | [-local]}Changes attributes of extended-cluster site in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl modify policyset {-attr "<attr_name>=<attr_value>[,<attr_name>=<attr_value>[, ...]]" | -file <file_name>} [-ksp] [-f]Changes attributes of Oracle Clusterware policy set in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl set ipmi binaryloc <binary_location>Sets the Clusterware value for IPMI tool binary location. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl create member_cluster_configuration <MEMBER_CLUSTER_NAME> -file <MANIFEST_XML> -member_type {database|application} [-version <VERSION>] [-domain_services [asm_storage {local|direct|indirect}] [rhp] [acfs]]Creates a member cluster configuration manifest file for a database or application member cluster.
crsctl modify category <category_name> [-attr "<attr_name>=<attr_value> [,<attr_name>=<attr_value>[,...]]"] [-i] [-f]Changes attributes of cluster resource category in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl modify resourcegrouptype <group_type_name> -attr "<attribute_name>=<attribute_value>"Changes attributes of Oracle Clusterware resource group type in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl modify type <type_name> -attr "ATTRIBUTE=<attribute_name>,TYPE={<string> | <int>} [,DEFAULT_VALUE=<default_value> [,FLAGS=[READONLY][| REQUIRED]]" [-i] [-f]]Changes attributes of Oracle Clusterware resource type in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl set cluster hubsize <hub_size>Sets the Clusterware value for Flex Cluster hub node limit. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl set cluster type {flex|application}Sets the Clusterware value for cluster type. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl set restricted placement {fill|spread}Sets the Clusterware value for restricted-placement policy. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl set server label <value>Sets the Clusterware value for server label. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl add resourcegrouptype <group_type_name> -basetype <base_group_type> {-file <file_path> | -attr "<attribute_name>=<attribute_value>"} [-i]Creates or registers Oracle Clusterware resource group type in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
Remove and drop
crsctl delete node -n <node_name>Removes cluster node entry from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl add css votedisk <vdisk> [...] [-purge]Creates or registers CSS voting disk configuration in Oracle Clusterware. This changes cluster configuration and can affect placement, permissions, or managed-resource behavior depending on the attributes supplied.
crsctl modify resource <resource_name> -attr "<attribute_name>=<attribute_value>" [-i] [-f] [-delete] [-group <group_name>] [-env "<env1>=<val1>,<env2>=<val2>,..."]Changes attributes of Oracle Clusterware resource in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl delete css votedisk {<voting_disk_GUID> [...] | <vdisk> [...] | +<diskgroup>}Removes CSS voting disk configuration from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete resource {"<resource_name> [...]" | -w "<filter>"} [-i] [-f]Removes Oracle Clusterware resource from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete serverpool <server_pool_name> [<server_pool_name> [...]] [-i]Removes server pool from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl eval delete serverpool <server_pool_name> [-admin [-l <level>] [-x] [-a]] [-explain]Predicts the effect of a CRSCTL delete operation on server pool without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl delete category <category_name> [<category_name> [...]] [-i]Removes cluster resource category from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete crs administrator -u <user_name> [-f]Removes CRS administrator entry from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete policy <policy_name> [<policy_name> [...]] [-i]Removes Oracle Clusterware policy from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl modify resourcegroup <group_name> -attr "<attribute_name>=<attribute_value>" [-i] [-f] [-delete]Changes attributes of Oracle Clusterware resource group in Oracle Clusterware. Attribute changes can alter placement, dependencies, permissions, startup behavior, or security settings depending on the object.
crsctl set cluster disabledtlsciphersuite add | delete <cipher_suite_name>Sets the Clusterware value for cluster disabledtlsciphersuite. This changes runtime or persistent configuration and should be coordinated with the components that consume the setting.
crsctl eval delete server <server_name> [-admin [-l <level>] [-x] [-a]] [-f] [-explain]Predicts the effect of a CRSCTL delete operation on Oracle Clusterware server object without making the actual change. It lets an administrator inspect placement, dependency, and policy consequences before running the real command.
crsctl delete cluster site <site_name>Removes extended-cluster site from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete resourcegroup {"<group_name> [...]" | -w "<filter>"} [-f] [-i]Removes Oracle Clusterware resource group from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete type <type_name> [-i]Removes Oracle Clusterware resource type from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete wallet -type <wallet_type> [-name <name>] [-user <user_name>]Removes Oracle Clusterware wallet from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete member_cluster_configuration <member_cluster_name> [-f]Removes member cluster configuration from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.
crsctl delete resourcegrouptype {"<group_type_name> [...]" | -w "<filter>"} [-i]Removes Oracle Clusterware resource group type from Oracle Clusterware configuration. This is a configuration-removal operation; for managed resources, nodes, wallets, or voting disks it can directly affect availability or future failover behavior.