CellCLI commands for Exadata

Every storage cell has its own command line, CellCLI. This is where I look when something is wrong on a cell: the alert history first, then the metrics, then the active requests. If a disk fails, the alert history tells you when and where; when the engineer replaces it, you see that too. Most commands here only read, so you can learn them safely on any cell.

Taught in Part 2, "Active Requests, Alerts, Metrics"

425 commands, grouped by what they do.

Check status and configuration

  • cellcli -e "LIST GRIDDISK"

    Lists Oracle Exadata Storage Server grid disks and their default status fields on the target cell. It is a read-only way to confirm which ASM-facing grid disks exist and whether they are active, inactive, or in another state.

    Read only

  • cellcli -e "LIST CELLDISK"

    Lists cell disk objects on the current Exadata storage cell. It is the basic read-only inventory check for the layer between physical disks and grid disks.

    Read only

  • cellcli -e "LIST FLASHCACHE"

    Lists Exadata Smart Flash Cache entries and their default status on the target storage cell. It is read-only and is the quick check before looking at detailed flash cache attributes or taking cache maintenance actions.

    Read only

  • cellcli -e "LIST CELL DETAIL"

    Displays detailed attributes for the local storage cell. It is read-only and gives a broad configuration and health snapshot, including status, alerting, networking, software, and hardware fields that are set on the cell.

    Read only

  • cellcli -e "LIST ALERTHISTORY"

    Displays alert history entries that occurred on the storage cell. It is read-only and provides the basic alert list before adding filters, detail output, ordering, or limits.

    Read only

  • cellcli -e "LIST LUN"

    Lists LUNs known to the target storage cell with their default status fields. It is read-only and helps connect physical disk, LUN, cell disk, and grid disk layers during disk mapping or replacement work.

    Read only

  • cellcli -e "LIST PHYSICALDISK"

    Lists physical disks and flash devices known to the storage cell in summary form. Read-only; it is a quick first pass before using DETAIL, attributes, or filters for a specific disk investigation.

    Read only

  • cellcli -e "LIST GRIDDISK DETAIL"

    Lists detailed attributes for all grid disks on the storage cell. Read-only command used to inspect ASM-facing grid disk state, size, status, cell disk mapping, cache devices, and availability.

    Read only

  • cellcli -e "LIST IORMPLAN DETAIL"

    Displays the current I/O Resource Management plan for the local storage cell, including plan directives, objective, and status. Read-only command used to verify storage-side I/O governance before changing or troubleshooting IORM.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES ALL"

    Displays all available CellCLI attributes for the local storage cell. Read-only; use it when the default LIST CELL output is too narrow and you need complete cell configuration, service, alerting, hardware, or software fields.

    Read only

  • cellcli -e "LIST IBPORT"

    Lists InfiniBand port entries and their default state on the target Exadata storage cell. It is read-only and is used to verify fabric port visibility and status before drilling into detailed port attributes.

    Read only

  • cellcli -e "LIST CELLDISK DETAIL"

    Displays detailed attributes for cell disks on the storage cell, including device mapping, disk type, free space, size, and status. Read-only; use it to inspect the cell disk layer between physical disks and grid disks before storage work.

    Read only

  • cellcli -e "LIST FLASHCACHE DETAIL"

    Displays detailed attributes for Exadata Smart Flash Cache on the storage cell, including size, effective cache size, status, creation time, and cell disk membership. Read-only; use it to inspect cache state before or after cache maintenance.

    Read only

  • cellcli -e "LIST ALERTHISTORY WHERE severity = 'critical' DETAIL"

    Lists detailed alert history records whose severity is critical on a storage cell. It is a focused read-only command for urgent alert triage.

    Read only

  • cellcli -e "LIST ALERTHISTORY DETAIL"

    Displays detailed alert history entries from the storage cell. Read-only; DETAIL expands each alert into fields such as sequence, begin/end time, severity, message, notification state, and examined-by status.

    Read only

  • cellcli -e "LIST METRICCURRENT CL_CPUT"

    Displays the current CL_CPUT metric for cell CPU utilization. Read-only command used to check whether storage-cell CPU pressure is contributing to performance symptoms.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES bbuStatus"

    Displays the battery backup unit status attribute for the storage cell. It is a read-only health check used during hardware service, BBU replacement, or power-protection triage.

    Read only

  • cellcli -e "LIST LUN WHERE lun=0_0"

    Filters storage cell LUN metadata to a specific LUN identifier. Read-only command used to trace hardware, controller, and disk mapping for one LUN without dumping every LUN on the cell.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES name,status,asmModeStatus,size"

    Lists selected grid disk attributes: name, CellCLI status, ASM mode status, and size. It is read-only and gives a compact view for checking whether ASM is using each grid disk and how much capacity each grid disk represents.

    Read only

  • cellcli -e "LIST IBPORT DETAIL LIMIT 20"

    Lists detailed InfiniBand port attributes on the storage cell, limited to 20 objects. Read-only command used to inspect port status, data rate, link counters, and bonding-related fields on InfiniBand-based Exadata systems.

    Read only

  • cellcli -e "LIST CELLDISK WHERE status != 'normal' DETAIL"

    Displays detailed information for cell disks whose status is not normal. It is read-only and focuses attention on disks that may require follow-up before ASM, grid disk, or hardware maintenance.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES name,asmModeStatus,asmDeactivationOutcome"

    Lists grid disks with their ASM mode status and ASM deactivation outcome. Read-only; this is used to confirm whether grid disks are online, unused, offline, or safely deactivated before cell maintenance proceeds.

    Read only

  • cellcli -e "LIST GRIDDISK WHERE asmModeStatus != 'ONLINE' DETAIL"

    Lists detailed grid disk records whose ASM mode status is not ONLINE. Read-only command used to find grid disks that are offline, unused, syncing, dropped, or unknown from the ASM perspective.

    Read only

  • cellcli -e "LIST GRIDDISK WHERE status!=active"

    Lists grid disks on the target storage cell whose status is not active. It is a read-only triage command for finding inactive, failed, or maintenance-state grid disks before ASM or cell remediation.

    Read only

  • cellcli -e "LIST PHYSICALDISK WHERE status != 'normal' DETAIL"

    Lists only the physical disks/flash devices on the cell whose status is not normal, with full detail. Read-only; a focused health check that returns just the problem devices instead of the full disk list. Distinct from the unfiltered form by its status filter.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES name,status,releaseVersion"

    Displays the storage cell name, status, and Exadata System Software releaseVersion. It is read-only and is a quick way to confirm which image release a cell is running.

    Read only

  • cellcli -e "LIST CELL"

    Displays the local storage cell using the default CellCLI attributes, giving a quick identity and status snapshot without the full DETAIL output. Read-only; it is a useful first check that you are connected to the expected cell.

    Read only

  • cellcli -e "LIST CELLDISK ATTRIBUTES name,status,size"

    Displays the name, status, and size for cell disks on the storage cell. It is read-only and provides a compact inventory of the cell disk layer between physical disks and grid disks.

    Read only

  • cellcli -e "LIST ALERTHISTORY WHERE endTime = null"

    Lists storage-cell alert history entries whose endTime is null, which identifies alerts that have not cleared. Read-only; it is a focused way to find currently open or active alert conditions.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES flashCacheMode"

    Displays the flashCacheMode attribute of the cell object, whether Smart Flash Cache is in WriteBack or WriteThrough mode. Read-only; a focused single-attribute query rather than a full cell dump.

    Read only

  • cellcli -e "LIST ALERTHISTORY WHERE examinedBy = '' DETAIL"

    Lists detailed storage-cell alert history entries where the examinedBy field is empty. Read-only; it helps find alerts that have not been marked or attributed during operational review.

    Read only

  • cellcli -e "LIST PHYSICALDISK WHERE diskType=HardDisk AND status!='normal'"

    Lists hard disks on a storage cell whose physical disk status is not normal. It is a read-only filter for failed, predictive-failure, confined, or otherwise unhealthy hard disks.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES releaseVersion"

    Displays the Exadata System Software release version running on the storage cell. Read-only; use it to confirm software levels before maintenance, patching, or compatibility checks.

    Read only

  • cellcli -e "LIST ALERTHISTORY WHERE ageInMinutes < 60"

    Lists storage cell alert history entries created within the last 60 minutes. It is read-only and useful for separating current incident signals from older retained alert history.

    Read only

  • cellcli -e "LIST CELLDISK" | grep -i failure

    Lists cell disks and filters the output for failure-related text at the shell level. Read-only; it is a quick screen for obvious failure strings, but a structured CellCLI status filter is better for formal evidence.

    Read only

  • cellcli -e "LIST ALERTHISTORY DETAIL LIMIT 20"

    Displays detailed alert history entries from the storage cell and limits the result set to 20 rows. It is a read-only way to inspect recent alert metadata, messages, severities, and timing without changing alert state.

    Read only

  • cellcli -e "LIST ALERTHISTORY WHERE severity = 'warning' DETAIL"

    Displays detailed storage cell alert history entries whose severity is warning. It is read-only and helps isolate non-critical warnings that may precede a hardware, capacity, or services incident.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES name,status,releaseVersion,kernelVersion,makeModel"

    Displays storage cell identity, online status, Exadata release version, host kernel version, and hardware make/model. It is read-only and useful for patch, support, or compatibility checks where software and hardware identity both matter.

    Read only

  • cellcli -e "LIST PHYSICALDISK <physical_disk_id> DETAIL"

    Shows detailed metadata for one physical disk or flash device on the storage cell. Read-only command used to inspect status, slot, type, and hardware identity for a specific device.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES ALL"

    Displays every reported attribute for Exadata grid disks on the target storage cell. It is read-only and gives the expanded ASM-facing storage view, including status, size, cell disk mapping, caching policy, and availability attributes.

    Read only

  • cellcli -e "LIST LUN WHERE status != 'normal' DETAIL"

    Lists detailed LUN records whose status is not normal. Read-only command used to identify storage-cell LUNs in warning, critical, or otherwise abnormal state before tracing physical disk and cell disk relationships.

    Read only

  • cellcli -e "LIST ALERTHISTORY ORDER BY beginTime DESC LIMIT 20"

    Lists alert history from the storage cell, sorted with the newest beginTime first and capped at 20 rows. It is read-only and gives a quick recent-alert timeline without dumping the full alert history.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES name,ipaddress1,ipaddress2"

    Displays the local storage cell name and primary cell network addresses. It is a focused read-only identity check for confirming which cell and network endpoints are being inspected.

    Read only

  • cellcli -e "LIST CELL DETAIL" | grep flashCacheMode

    Lists detailed storage cell attributes and filters for the flashCacheMode setting. Read-only; it quickly confirms whether the cell is configured for write-through or write-back flash cache behavior.

    Read only

  • cellcli -e "LIST PHYSICALDISK WHERE diskType=HardDisk"

    Lists physical disks on the storage cell whose disk type is HardDisk. It is a read-only inventory command for confirming hard disk presence, identity, and status before deeper hardware or grid-disk work.

    Read only

  • cellcli -e "LIST QUARANTINE DETAIL"

    Displays detailed Exadata quarantine records on the storage cell. Read-only; use it to inspect quarantined SQL, offload, or cell-to-cell operation entries that may affect query behavior or availability protection.

    Read only

  • cellcli -e "LIST GRIDDISK WHERE cellDisk='CD_00_fin5pdceladm06' ATTRIBUTES name,size,status,asmModeStatus"

    Lists grid disks backed by a specific Exadata cell disk and returns only the selected health and ASM-facing attributes. Read-only; useful for confirming which ASM grid disks are mapped to a physical/cell disk and whether ASM sees them online, syncing, offline, or unused.

    Read only

  • cellcli -e "LIST CELLDISK ATTRIBUTES ALL"

    Displays every reported attribute for cell disks on the target storage cell. It is a read-only view of the layer between physical disks and grid disks, including size, status, device mapping, and other cell disk metadata.

    Read only

  • cellcli -e "LIST FLASHLOG"

    Displays a summary of Oracle Exadata Smart Flash Log entries on the storage cell. Read-only command used for a quick check that the flash log exists and reports a normal status.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES name,status,flashCacheMode,interconnectCount"

    Displays the cell name, status, flash cache mode, and number of configured interconnects. It is read-only and gives a compact view of cache mode and cell connectivity attributes.

    Read only

  • cellcli -e "LIST GRIDDISK DETAIL LIMIT 20"

    Lists detailed grid disk attributes but limits the output to 20 objects. Read-only command useful when a full GRIDDISK detail dump is too large for a quick screen check.

    Read only

  • cellcli -e "LIST PHYSICALDISK ATTRIBUTES name, id, slotNumber, status"

    Lists selected physical disk attributes for a compact hardware inventory view. Read-only command useful for dashboards, replacement checks, or comparing disk slot and status values.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE name LIKE 'CD_IO%' DETAIL"

    Displays detailed current metric observations whose names begin with CD_IO, typically cell disk I/O metrics. It is read-only and narrows the metric output to storage I/O counters instead of dumping every current metric on the cell.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE name LIKE 'FL.*' DETAIL"

    Lists detailed current metrics whose names begin with FL, the flash-log metric prefix. Read-only command used to focus on Smart Flash Log observations during redo-latency or flash-log health triage.

    Read only

  • cellcli -e "LIST FLASHCACHE DETAIL LIMIT 20"

    Displays detailed Exadata Smart Flash Cache attributes and limits the result set to 20 rows. It is read-only and helps confirm flash cache status, size, effective cache size, and related cell disk information.

    Read only

  • cellcli -e "LIST SOFTWAREHISTORY"

    Displays the default summary of final states for past storage cell software updates. Read-only command used for a quick view of completed or failed update history.

    Read only

  • cellcli -e "LIST CELL DETAIL" | egrep 'interconnect|ipaddress'

    Lists detailed storage cell attributes and filters the output to interconnect and IP address lines. Read-only; useful for quickly confirming cell network identity without scanning the full detail output.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES name,cachingPolicy,cachedBy"

    Lists each grid disk with its flash caching policy and the flash disk currently caching it. Read-only; use it to verify cache placement before flash or PMEM maintenance.

    Read only

  • cellcli -e "LIST PHYSICALDISK ATTRIBUTES ALL"

    Displays attributes for physical disks known to the storage cell, including health and device-related fields. This is read-only and is commonly used to confirm disk identity, status, and failure signals before replacement or escalation.

    Read only

  • cellcli -e "LIST CELLDISK DETAIL LIMIT 20"

    Displays detailed cell disk attributes and caps the result set at 20 objects. Read-only; useful for sampling cell disk state, mapping, and capacity details without producing a full inventory dump on larger cells.

    Read only

  • cellcli -e "LIST CELL DETAIL" && imageinfo

    Shows detailed CellCLI metadata for the local storage cell, then prints Exadata image information from the operating system. Both commands are read-only and together provide cell identity, service state, and software image context.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'CELL' DETAIL"

    Lists detailed current metric values for the storage cell object itself. Read-only; it focuses METRICCURRENT on whole-cell counters rather than disk, flash, or grid-disk metrics.

    Read only

  • cellcli -e "LIST LUN DETAIL LIMIT 20"

    Lists the LUNs (logical unit numbers) on the storage cell with full detail, mapping each physical disk/flash device to its LUN identity, status, and slot. Read-only; LIMIT 20 caps the row count. Used to trace hardware-to-cell-disk identity during disk/flash mapping triage.

    Read only

  • cellcli -e "LIST DATABASE"

    Lists active databases known to the storage cell. It is read-only and shows how the cell sees database clients that may use offload, flash cache, PMEM cache, IORM profiles, or security-scoped storage.

    Read only

  • cellcli -e "LIST PHYSICALDISK WHERE diskType=flashdisk"

    Lists physical disks filtered to flash devices on the storage cell. Read-only command used to inspect flash hardware inventory or isolate flash devices during storage triage.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'CELL'"

    Lists current metric observations whose objectType is CELL. Read-only command used to focus on cell-level metrics instead of disk, flash, IORM, or network-object metrics.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'CELLDISK' DETAIL"

    Lists detailed current metric observations whose objectType is CELLDISK. Read-only command used to focus on metrics tied to individual cell disks, such as latency, throughput, request counts, and utilization.

    Read only

  • cellcli -e "LIST PHYSICALDISK DETAIL LIMIT 20"

    Lists the physical disks and flash devices on the storage cell with full detail including status, slot, and predictive-failure indicators. Read-only; the primary command to spot failed, predictive-failure, poor-performance, or missing storage devices. LIMIT 20 caps output.

    Read only

  • cellcli -e "LIST CELL DETAIL" | grep ipaddress1

    Lists detailed storage cell attributes and filters for the ipaddress1 line. Read-only; useful for confirming the first configured cell IP address during inventory or troubleshooting.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES name,offset,size"

    Displays each grid disk name with its offset and size on the storage cell. It is a focused read-only query often used to map grid disk layout before replacement, repair, or comparison work.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES name,offset,size,cachingPolicy"

    Lists grid disk names with their offset, size, and caching policy on the storage cell. Read-only; useful for matching grid disk layout before recreating disks or validating storage configuration.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'CELLDISK'"

    Lists current metric values whose object type is CELLDISK on the storage cell. Read-only; it narrows METRICCURRENT output to cell-disk metrics so disk-group or cell-disk behavior can be checked without dumping every metric.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'FLASHCACHE' DETAIL"

    Lists detailed current metrics for FLASHCACHE objects on the storage cell. Read-only; it focuses current metric output on flash cache behavior for cache, latency, or dirty-data investigation.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'GRIDDISK'"

    Lists current metric observations whose object type is GRIDDISK on the target storage cell. This is read-only and focuses the output on grid disk counters that can explain ASM-facing storage behavior.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT DETAIL LIMIT 20"

    Lists detailed Smart Flash Cache content entries on the storage cell and caps the result set at 20. Read-only; it shows cached object identity, database identity, cache sizes, and hit/miss counters without dumping the entire cache catalog.

    Read only

  • cellcli -e "LIST FLASHLOG DETAIL"

    Displays detailed attributes for Oracle Exadata Smart Flash Log entries on the target storage cell. It is read-only and shows log name, status, size, cell disk membership, and related flash-log state used for redo latency analysis.

    Read only

  • cellcli -e "LIST METRICHISTORY WHERE name LIKE '.*IO_RQ.*' DETAIL ORDER BY metricValue DESC LIMIT 10"

    Lists historical metric observations whose metric name contains IO_RQ, ordered by metric value and limited to the largest 10 results. Read-only; it focuses a potentially large METRICHISTORY data set on I/O request counters for quick triage.

    Read only

  • cellcli -e "LIST ALERTHISTORY ATTRIBUTES ALL"

    Lists alert history entries from the storage cell with all available displayed attributes. Read-only; it gives a broad alert-history view for incident evidence, but can produce a large amount of operational detail.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES pmemCacheMode"

    Displays the PMEM cache mode configured on the storage cell, such as write-through or write-back mode on systems with PMEM cache. Read-only; useful for confirming a cell matches the rest of the cluster before PMEM maintenance.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'FLASHCACHE'"

    Lists current metric observations whose object type is FLASHCACHE on the target storage cell. This is read-only and narrows METRICCURRENT output to flash cache related counters instead of dumping every current metric.

    Read only

  • cellcli -e "LIST QUARANTINE WHERE quarantineType = 'SQL PLAN' DETAIL"

    Displays detailed quarantine records whose quarantine type is SQL PLAN. Read-only; it focuses quarantine review on plan-level SQL isolation entries that may be protecting cell stability but affecting query execution.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT WHERE cachedSize > 0 DETAIL LIMIT 100"

    Lists detailed Smart Flash Cache entries whose cachedSize is greater than zero, limited to 100 rows. Read-only command used to focus on objects that are actually consuming flash-cache space.

    Read only

  • cellcli -e "LIST THRESHOLD"

    Displays Exadata cell metric threshold objects and their default listed attributes. It is read-only and helps identify the thresholds that drive warning and critical cell alerts.

    Read only

  • cellcli -e "LIST DISKMAP"

    Displays the storage cell disk map, linking physical disk identity to cell disk, device partition, and grid disk placement. Read-only; it is a core command for tracing a failed or predictive-failure device back to the storage objects it supports.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'PHYSICALDISK' DETAIL"

    Lists detailed current metrics for PHYSICALDISK objects on an Exadata storage cell. Read-only; use it to isolate disk-level metric observations such as status, I/O, or latency-related readings without scanning unrelated object types.

    Read only

  • cellcli -e "LIST METRICHISTORY WHERE name LIKE 'CD_IO%' DETAIL LIMIT 100"

    Lists historical cell metrics filtered by metric name pattern (here CD_IO%, cell-disk I/O metrics) with full detail. Read-only; the WHERE/LIKE clause narrows the result to one metric family so you avoid a full METRICHISTORY dump. Distinct from the unfiltered form by its name filter.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT WHERE dbUniqueName = '<DB_UNIQUE_NAME>' DETAIL"

    Displays detailed Smart Flash Cache content entries for a specific database unique name. It is read-only and helps show which cached blocks or objects are associated with that database from the target cell's perspective.

    Read only

  • cellcli -e "LIST SOFTWAREHISTORY DETAIL"

    Displays final states for past Exadata storage server software updates with detailed attributes. It is read-only and helps reconstruct patch history after maintenance or a failed update.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE name LIKE 'FC.*' DETAIL"

    Lists detailed current metrics whose names begin with FC, the flash-cache metric prefix. Read-only command used to inspect flash-cache observations without listing every metric on the cell.

    Read only

  • cellcli -e "LIST FLASHCACHE ATTRIBUTES ALL"

    Displays every reported attribute for the Exadata Smart Flash Cache on the target storage cell. This is a read-only inventory view of cache name, status, size, cell disk membership, and related cache state.

    Read only

  • cellcli -e "LIST THRESHOLD DETAIL"

    Shows detailed threshold objects for storage cell metrics. Read-only command used to inspect threshold names, comparisons, warning values, and related alert settings.

    Read only

  • cellcli -e "LIST DATABASE DETAIL LIMIT 20"

    Lists detailed metadata for active databases known to the storage cell and caps the output at 20 objects. Read-only; the detail view can show database identity, ASM cluster, IORM profile, and cache allocation fields.

    Read only

  • cellcli -e "LIST PHYSICALDISK WHERE diskType=PMEM"

    Lists physical disk objects on a storage cell filtered to persistent memory devices. Read-only command used on PMEM-capable Exadata systems to confirm device presence, status, and mapping before storage triage.

    Read only

  • cellcli -e "LIST METRICCURRENT DETAIL LIMIT 20"

    Lists current storage-cell metric observations in DETAIL format and limits the result set to 20 objects. Read-only; it is a bounded live metric sample for checking names, objects, values, collection time, and alert state.

    Read only

  • cellcli -e "LIST GRIDDISK ATTRIBUTES <attribute_list>"

    Displays selected attributes for Exadata grid disks on a storage cell. It is a read-only way to inspect grid disk status, ASM-related state, size, offset, or caching fields without dumping every attribute.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'FLASHLOG' DETAIL"

    Lists current metric observations for FLASHLOG objects and formats each metric with detailed attributes. This is read-only and is useful when default metric output is too compact for incident evidence.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE objectType = 'GRIDDISK' DETAIL"

    Lists detailed current metrics for GRIDDISK objects on the storage cell. Read-only; it narrows live metric output to grid disks, which is useful when correlating ASM-facing storage behavior with cell metrics.

    Read only

  • cellcli -e "LIST QUARANTINE DETAIL LIMIT 20"

    Displays detailed Exadata quarantine records and limits the output to 20 rows. This is read-only and helps identify quarantined SQL, offload, or storage-related entries that may affect query behavior.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT WHERE objectNumber = <OBJECT_NUMBER> DETAIL"

    Lists Smart Flash Cache entries for a specific database object number, such as a table, index, or partition data object. The documented workflow is to resolve the object's DATA_OBJECT_ID in the database, then filter FLASHCACHECONTENT by objectNumber on the storage cell.

    Read only

  • cellcli -e "LIST DIAGPACK ATTRIBUTES ALL"

    Lists diagnostic packages known to the storage cell and requests all available attributes. It is read-only and helps check package status, timing, and identifiers before downloading or sending diagnostics to Oracle Support.

    Read only

  • cellcli -e "LIST LUN WHERE diskType=flashdisk"

    Lists only LUNs backed by flash disk devices on the storage cell. Read-only command used to isolate flash LUN mapping during flash, cache, or storage hardware investigations.

    Read only

  • cellcli -e "LIST METRICDEFINITION"

    Lists metric definitions available on the storage cell, including the names and metadata used to interpret metric observations. It is read-only and is useful before querying METRICCURRENT, METRICHISTORY, or threshold-related data.

    Read only

  • cellcli -e "LIST METRICHISTORY WHERE name LIKE 'FC%' DETAIL LIMIT 100"

    Lists historical metric samples whose metric names begin with FC, typically flash cache metric families. Read-only; the name filter and LIMIT keep the history query focused for an incident window.

    Read only

  • cellcli -e "list diskmap" | grep 'X:Y'

    Lists the storage cell disk map and filters it at the shell for a specific physical disk identifier such as a slot/LUN value. It is read-only and maps a physical disk back to its cell disk, device partition, and grid disks during replacement planning.

    Read only

  • cellcli -e "LIST IORMPLAN ATTRIBUTES ALL"

    Lists all displayed attributes for the current IORM plan on the local storage cell. Read-only command used to inspect the plan name, category plan, database plan, objective, and status in a compact attribute form.

    Read only

  • cellcli -e "LIST QUARANTINE WHERE quarantineType = 'DATABASE' DETAIL"

    Displays detailed quarantine records whose quarantine type is DATABASE. Read-only; it focuses quarantine review on database-scoped isolation records that may affect workload behavior or offload processing.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT WHERE cachedKeepSize > 0 DETAIL"

    Lists detailed Smart Flash Cache content entries whose cachedKeepSize is greater than zero. Read-only; it focuses on objects consuming KEEP cache space, which is useful when checking CELL_FLASH_CACHE KEEP behavior or cache residency.

    Read only

  • cellcli -e "LIST ACTIVEREQUEST DETAIL LIMIT 20"

    Displays detailed information for active storage cell requests and limits the output to 20 objects. Read-only; it helps inspect live request IDs, database/session context, I/O type, file identity, and request state during performance triage.

    Read only

  • cellcli -e "LIST ACTIVEREQUEST"

    Displays outstanding active requests on the storage cell using the default CellCLI output. Read-only; it is a quick live check for whether requests are currently queued or executing on the cell.

    Read only

  • cellcli -e "LIST DATABASE DETAIL"

    Displays detailed database metadata known to the storage cell, including database identifiers, ASM cluster name, IORM profile, and cache-related limits where present. It is read-only and gives a cell-local view of database clients.

    Read only

  • cellcli -e "LIST METRICHISTORY WHERE name LIKE 'CL_%' DETAIL LIMIT 100"

    Lists historical metric samples whose metric names begin with CL_, the storage cell metric family. Read-only; it focuses METRICHISTORY on cell-level metrics for trend or incident analysis.

    Read only

  • cellcli -e "LIST PMEMCACHE DETAIL"

    Displays detailed attributes for the PMEM cache object on a storage cell. This is read-only and applies only to Exadata storage server models where PMEM cache is present.

    Read only

  • cellcli -e "list celldisk attributes name where name like '.*cell01'"

    Lists cell disk names whose name matches the supplied pattern. It is read-only and helps narrow a cell disk inventory to the objects belonging to a particular naming convention or cell suffix.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES name, status, enableSmartStorage"

    Displays the cell name, online status, and enableSmartStorage setting. It is read-only and is commonly used on XT storage servers to verify whether Exadata System Software capabilities such as Smart Scan and Storage Indexes are enabled.

    Read only

  • cellcli -e "LIST METRICCURRENT WHERE name LIKE 'GD_IO%' DETAIL"

    Lists current Exadata storage-cell metrics whose names begin with GD_IO, with detailed attributes. It is a focused read-only view of live grid disk I/O counters for storage performance triage.

    Read only

  • cellcli -e "LIST DIAGPACK DETAIL LIMIT 20"

    Lists detailed diagnostic package records on a storage cell, limited to 20 rows. It is a read-only way to inspect available diagpacks before collecting or transferring diagnostic evidence.

    Read only

  • cellcli -e "LIST DIAGPACK DETAIL"

    Lists detailed diagnostic package records on a storage cell. Use it to inspect generated diagpacks before collecting, transferring, or referencing them in a support workflow.

    Read only

  • cellcli -e "LIST IORMPROFILE DETAIL"

    Lists all IORM (I/O Resource Manager) profile definitions on the storage cell with full attribute detail. Read-only; shows the reusable profile templates that can be referenced by an IORM plan before you apply or troubleshoot resource management.

    Read only

  • cellcli -e "LIST METRICHISTORY DETAIL LIMIT 20"

    Lists historical storage-cell metric observations with full attribute detail. Read-only; returns the retained metric samples (name, object, value, collection time) so you can compare before/during/after values across an incident window. LIMIT 20 caps output.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT WHERE dbID = '<DB_ID>' DETAIL"

    Lists detailed Smart Flash Cache content entries for a specific database ID on the storage cell. Read-only; it narrows cache-residency investigation to one database instead of scanning all cached objects.

    Read only

  • cellcli -e "LIST METRICCURRENT ATTRIBUTES ALL"

    Displays all available attributes for current Exadata cell metric observations. It is read-only, but it can produce a large result set because METRICCURRENT contains many live storage, flash, network, CPU, and offload metrics.

    Read only

  • cellcli -e "LIST IORMPROFILE"

    Lists I/O Resource Management profiles defined on the storage cell. It is read-only and helps show the reusable profiles that can be associated with databases through IORM configuration.

    Read only

  • cellcli -e "LIST METRICHISTORY WHERE name LIKE 'GD_IO%' DETAIL LIMIT 100"

    Lists historical grid-disk I/O metrics with detail and caps the output at 100 rows. Read-only; the GD_IO% filter narrows METRICHISTORY to grid disk metric families for storage-layer performance triage.

    Read only

  • cellcli -e "LIST SOFTWAREHISTORY DETAIL LIMIT 20"

    Displays detailed history for recent Exadata storage cell software updates, limited to 20 rows. It is read-only and helps reconstruct update outcomes, failures, and completion timestamps during patch validation or rollback analysis.

    Read only

  • cellcli -e "LIST PHYSICALDISK WHERE diskType='PMEM' ATTRIBUTES name, physicalSize"

    Lists PMEM physical disks and their physical sizes on the target storage cell. It is a read-only inventory check for confirming PMEM modules before cache creation or maintenance.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT WHERE objectNumber = '<OBJECT_NUMBER>' DETAIL"

    Displays detailed Smart Flash Cache content entries for a specific database object number. It is read-only and helps confirm whether a known segment or object is represented in flash cache on the target cell.

    Read only

  • cellcli -e "LIST QUARANTINE ATTRIBUTES ALL"

    Displays all available attributes for Exadata quarantine records on the storage cell. Read-only; use it to inspect the fields available for quarantined SQL, offload, or storage-related entries before building a filtered query.

    Read only

  • cellcli -e "LIST PMEMCACHE"

    Lists the Persistent Memory cache object on PMEM-capable Exadata storage cells. Read-only; the default output is a quick health/status check before looking at detailed cache attributes.

    Read only

  • cellcli -e "LIST PMEMLOG"

    Lists Persistent Memory log resources on PMEM-capable Exadata storage cells. Read-only; it shows PMEM log objects used for commit acceleration before deeper detail or attribute queries.

    Read only

  • cellcli -e "LIST XRMEMCACHE DETAIL"

    Displays detailed Exadata RDMA Memory Cache attributes on XRMEM-capable systems. Read-only; use it to inspect cache size, creation time, and state before deeper cache effectiveness analysis.

    Read only

  • cellcli -e "LIST FLASHCACHECONTENT ATTRIBUTES ALL"

    Lists all displayed attributes for entries currently represented in Exadata Smart Flash Cache on the storage cell. Read-only command used to inspect cache residency, cached size, database identity, object number, and related counters.

    Read only

  • cellcli -e "LIST THRESHOLD DETAIL LIMIT 20"

    Displays detailed threshold definitions for Exadata cell metrics, limited to 20 rows. It is read-only and helps inspect warning and critical rules before changing alert thresholds.

    Read only

  • cellcli -e "LIST IORMPROFILE DETAIL LIMIT 20"

    Displays detailed IORM profile information with the output limited to 20 rows. It is read-only and is useful when a cell has many profiles or when a bounded detail sample is enough for triage.

    Read only

  • cellcli -e "LIST PLUGGABLEDATABASE"

    Lists pluggable databases known to the Exadata storage cell in summary form. Read-only; it verifies PDB-level visibility used by storage metrics, IORM, and offload-related analysis.

    Read only

  • cellcli -e "LIST SOFTWAREUPDATE DETAIL"

    Displays detailed status for the most recently scheduled Exadata storage cell software update. Read-only; use it to inspect patch or upgrade state, including failed update details, before deciding the next maintenance step.

    Read only

  • cellcli -e "LIST USER DETAIL LIMIT 20"

    Displays detailed CellCLI user attributes, limited to 20 rows. It is read-only and useful for checking storage cell users, roles, and access-control metadata before account changes.

    Read only

  • cellcli -e "LIST PMEMCACHE ATTRIBUTES ALL"

    Displays all attributes of the Persistent Memory (PMEM) cache on the storage cell. Read-only; shows PMEM cache size, status, and configuration. Applies only to Exadata hardware that has persistent memory.

    Read only

  • cellcli -e "LIST FLASHLOG ATTRIBUTES ALL"

    Lists all displayed attributes for Oracle Exadata Smart Flash Log entries on the storage cell. Read-only command used to inspect flash log name, status, size, effective size, cell disks, and degradation state.

    Read only

  • cellcli -e "DESCRIBE FLASHCACHE"

    Lists the attributes of the FLASHCACHE object on a storage cell, the field list for Exadata Smart Flash Cache. Read-only metadata; run it to confirm available columns before building a LIST FLASHCACHE query or a flash cache configuration change.

    Read only

  • cellcli -e "LIST PMEMCACHE DETAIL LIMIT 20"

    Displays detailed Persistent Memory cache attributes and limits the result set to 20 rows. This is read-only and applies only to Exadata storage server models that expose PMEM cache objects.

    Read only

  • cellcli -e "LIST METRICCURRENT CD_IO_TM_W_SM_RQ"

    Displays the current CD_IO_TM_W_SM_RQ metric, the average latency per request for small writes to a cell disk. Read-only command used to inspect cell-disk small-write latency during storage performance triage.

    Read only

  • cellcli -e "DESCRIBE CELL"

    Lists the attributes of the CELL object in CellCLI, the full set of cell-level configuration and status fields (name, status, services, IP addresses, model, etc.). Read-only metadata describe, typically run before LIST CELL DETAIL.

    Read only

  • cellcli -e "LIST ALERTDEFINITION"

    Displays the alert definitions available on the storage cell, including the alert sources that can generate cell alerts. It is read-only and useful for understanding what an alert name or metric-backed alert represents before tuning notifications or thresholds.

    Read only

  • cellcli -e "LIST SOFTWAREUPDATE"

    Displays the status of the most recently scheduled Exadata storage server software update. It is read-only and helps confirm whether an update is ready, running, completed, or failed.

    Read only

  • cellcli -e "DESCRIBE ALERTHISTORY"

    Lists the attributes of the ALERTHISTORY object in CellCLI, the field list for a storage cell's alert history. Read-only; run it to see which columns are available before building a LIST ALERTHISTORY query.

    Read only

  • cellcli -e "LIST ALERTDEFINITION DETAIL"

    Displays storage cell alert definitions in DETAIL format, expanding each definition into attribute/value lines such as alert source, alert type, metric name, and description. Read-only; use it to inspect which alert classes the cell can raise before alert triage or configuration review.

    Read only

  • cellcli -e "DESCRIBE PHYSICALDISK"

    Lists the attributes of the PHYSICALDISK object on an Exadata storage cell, the field list describing physical hard disks and flash devices and their health. Read-only; use it to see available columns before a LIST PHYSICALDISK query.

    Read only

  • cellcli -e "DESCRIBE METRICCURRENT"

    Lists the attributes of the METRICCURRENT object on an Exadata storage cell, the field list for current cell metric values. Read-only; use it to learn which columns exist before building a LIST METRICCURRENT query.

    Read only

  • cellcli -e "LIST METRICDEFINITION DETAIL LIMIT 20"

    Displays detailed definitions for cell metrics, including how metric names are described and categorized by CellCLI. Read-only; use it to confirm what a metric means before querying METRICCURRENT or METRICHISTORY.

    Read only

  • cellcli -e "LIST PLUGGABLEDATABASE DETAIL LIMIT 20"

    Displays detailed storage-cell metadata for active pluggable databases, limited to 20 rows. Read-only; it exposes PDB-level visibility such as container identity and cache/IORM attributes known to the cell.

    Read only

  • cellcli -e "LIST PMEMLOG DETAIL LIMIT 20"

    Displays detailed Persistent Memory log attributes and limits output to 20 rows. Read-only; it helps inspect PMEM log status, size, and degraded cell disks on PMEM-capable storage servers.

    Read only

  • cellcli -e "LIST PMEMLOG DETAIL"

    Displays detailed attributes for the Persistent Memory log on supported Exadata storage servers. It is read-only and shows PMEM log status, size, cell disk membership, and related state used for commit-latency analysis on PMEM systems.

    Read only

  • cellcli -e "LIST SOFTWAREUPDATE DETAIL LIMIT 20"

    Displays detailed status for the most recently scheduled Exadata storage cell software update, capped at 20 rows. Read-only; useful during patching to inspect the update name, status, store, and time without changing the update state.

    Read only

  • cellcli -e "LIST XRMEMCACHECONTENT DETAIL LIMIT 20"

    Displays detailed information about objects represented in Exadata RDMA Memory Cache content, limited to 20 rows. Read-only; useful for cache-content analysis without dumping the entire XRMEM cache content set.

    Read only

  • cellcli -e "LIST XRMEMLOG DETAIL"

    Displays detailed attributes for XRMEM log resources on the local storage cell. It is read-only and supports low-latency commit or redo-path investigations on supported Exadata memory-tier hardware.

    Read only

  • cellcli -e "LIST LUN ATTRIBUTES ALL"

    Displays every reported attribute for LUNs on the target Exadata storage cell. It is read-only and exposes LUN identity, disk type, size, RAID/device mapping, physical drives, and status used in disk replacement or storage mapping work.

    Read only

  • cellcli -e "DESCRIBE CELLDISK"

    Displays the attributes available for the CELLDISK object type, the cell-layer disk objects created from physical disks or LUNs. Read-only; use it before listing cell disks or mapping cell disks to grid disks.

    Read only

  • cellcli -e "DESCRIBE GRIDDISK"

    Displays the attributes available for the GRIDDISK object type, the storage-cell objects presented to Oracle ASM. Read-only; use it to confirm modifiable and listable grid disk fields before maintenance or inventory queries.

    Read only

  • cellcli -e "LIST PLUGGABLEDATABASE ATTRIBUTES ALL"

    Displays all attributes for the active pluggable databases (PDBs) known to the storage cell. Read-only; the cell tracks PDB identity for per-PDB I/O metrics, IORM, and offload, and this command shows that PDB metadata as seen from the cell.

    Read only

  • cellcli -e "LIST ALERTDEFINITION DETAIL LIMIT 20"

    Lists detailed alert definition records on the storage cell, limiting output to 20 objects. Read-only; the DETAIL form expands each object into attribute/value lines for easier inspection.

    Read only

  • cellcli -e "LIST THRESHOLD ATTRIBUTES ALL"

    Lists all attributes for metric thresholds configured on the storage cell. Read-only command used to review warning and critical alert thresholds before changing alert policy.

    Read only

  • cellcli -e "DESCRIBE FLASHCACHECONTENT"

    Lists the attributes of the FLASHCACHECONTENT object, the per-object/per-block contents currently held in Exadata Smart Flash Cache. Read-only metadata; run it to see available columns before a LIST FLASHCACHECONTENT query when investigating what is cached.

    Read only

  • cellcli -e "DESCRIBE FLASHLOG"

    Lists the attributes of the FLASHLOG object on a storage cell, the field list describing Exadata Smart Flash Log configuration and state (cell disks, size, status, etc.). Read-only metadata command; use it before a LIST FLASHLOG query.

    Read only

  • cellcli -e "LIST KEY DETAIL LIMIT 20"

    Displays detailed key entries for Exadata storage-cell security clients, limited to the first 20 rows. It is read-only, but the output can include sensitive key values and key type information used by ASM-scoped, database-scoped, or cell security workflows.

    Read only

  • cellcli -e "LIST DATABASE ATTRIBUTES ALL"

    Displays all available CellCLI database attributes for active databases known to the storage cell. It is read-only and shows how the cell sees database identity, IORM/profile, and cache-related metadata.

    Read only

  • cellcli -e "LIST IBPORT ATTRIBUTES ALL"

    Lists all displayed attributes for InfiniBand ports on the storage cell. Read-only command used to review port status, link counters, data rate, firmware version, and active-slave state.

    Read only

  • cellcli -e "LIST SOFTWAREHISTORY ATTRIBUTES ALL"

    Lists all available attributes for past Exadata storage cell software updates. Read-only command used to review patch history and final update states during maintenance validation or rollback analysis.

    Read only

  • cellcli -e "LIST USER ATTRIBUTES ALL"

    Lists all attributes for CellCLI users on the storage cell. Read-only command used to review local cell accounts before access-control changes or security audits.

    Read only

  • cellcli -e "LIST XRMEMCACHE"

    Displays Exadata RDMA Memory Cache attributes for the local storage cell. It is a read-only check of XRMEM cache identity and state, useful before deeper cache or latency investigation.

    Read only

  • cellcli -e "LIST METRICHISTORY ATTRIBUTES ALL"

    Displays historical metric observations and their attributes on the storage cell. This is read-only and helps compare metric values across an incident window instead of relying only on current counters.

    Read only

  • cellcli -e "LIST ACTIVEREQUEST ATTRIBUTES ALL"

    Lists all displayed attributes for outstanding active requests on the storage cell. Read-only; useful for seeing current cell activity during live performance, offload, or service triage.

    Read only

  • cellcli -e "LIST METRICDEFINITION ATTRIBUTES ALL"

    Displays metric definition records on the storage cell, including the available attributes for each metric definition. This is read-only and helps explain what a metric measures before it is used in diagnosis or reporting.

    Read only

  • cellcli -e "LIST ALERTDEFINITION ATTRIBUTES ALL"

    Lists all displayed attributes for alert definitions on the storage cell. Read-only; use it to review alert sources, metric mappings, and alert metadata without changing alert configuration.

    Read only

  • cellcli -e "LIST ROLE DETAIL LIMIT 20"

    Displays detailed CellCLI role definitions and limits the output to 20 rows. Read-only; it shows role names and privileges assigned for storage-cell access control.

    Read only

  • cellcli -e "LIST XRMEMLOG"

    Displays XRMEM log resources on the local storage cell. In 26ai documentation, the command is tied to Exadata System Software 23.1.0 and is equivalent to LIST PMEMLOG on supported X8M and X9M models.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES rescuePlan"

    Displays the storage cell rescuePlan attribute, which records commands that can restore settings after a server rescue. Read-only; the output may contain configuration commands, thresholds, notification settings, and other operational details.

    Read only

  • cellcli -e "LIST METRICSTREAM DETAIL LIMIT 20"

    Displays detailed metrics included in the Exadata metric stream and limits the output to 20 rows. Read-only; it is similar to METRICCURRENT but only returns metrics participating in the real-time metric stream.

    Read only

  • cellcli -e "LIST OFFLOADGROUP DETAIL LIMIT 20"

    Displays detailed attributes for Exadata offload groups and limits the result set to 20 rows. Read-only; it helps inspect offload group configuration and package associations without changing offload behavior.

    Read only

  • cellcli -e "LIST OFFLOADPACKAGE DETAIL LIMIT 20"

    Displays detailed Exadata offload package attributes and limits the output to 20 rows. Read-only; it shows installed offload server package information, which indirectly reflects database offload support on the cell.

    Read only

  • cellcli -e "LIST PLUGGABLEDATABASE DETAIL"

    Lists detailed pluggable database metadata known to the storage cell. Read-only; the cell uses PDB identity for IORM, metrics, and offload visibility, so this helps confirm what the cell can see.

    Read only

  • cellcli -e "LIST XRMEMCACHE DETAIL LIMIT 20"

    Displays detailed Exadata RDMA Memory Cache information, limited to a small result set. Read-only command used to inspect XRMEM cache size, state, and cache attributes on XRMEM-capable systems.

    Read only

  • cellcli -e "LIST BACKUP SUMMARY"

    Lists a summary of the cell's local backup metadata (the cell's own software/configuration backups). Read-only; used to confirm a cell backup exists and review its details before cell maintenance or recovery.

    Read only

  • cellcli -e "LIST PMEMLOG ATTRIBUTES ALL"

    Displays all attributes for the PMEM log object on a storage cell. This is read-only and applies to PMEM-capable Exadata models where PMEM log is used for low-latency write acceleration.

    Read only

  • cellcli -e "DESCRIBE IORMPLAN"

    Lists the attributes of the IORMPLAN object on a storage cell (name, catPlan, dbPlan, objective, status and their modifiable flags). Read-only metadata command; use it to see the field list before building a LIST IORMPLAN or ALTER IORMPLAN command.

    Read only

  • cellcli -e "DESCRIBE LUN"

    Lists the attributes of the LUN object type on an Exadata storage cell. Read-only, it shows the field list for the cell's logical units (mapping of physical disks/flash to cell devices) so you can construct a valid LIST LUN query.

    Read only

  • cellcli -e "LIST XRMEMLOG DETAIL LIMIT 20"

    Displays detailed XRMEM log information for the local storage cell, limited to 20 rows. It is read-only and useful for checking RDMA memory log resources used for redo-related acceleration.

    Read only

  • cellcli -e "DESCRIBE METRICHISTORY"

    Lists the attributes of the METRICHISTORY object on an Exadata storage cell, the field list for historical (collected) cell metric values. Read-only; use it to see available columns before a LIST METRICHISTORY query.

    Read only

  • cellcli -e "DESCRIBE PMEMCACHE"

    Lists the attributes of the PMEMCACHE object on an Exadata storage cell, the field list for the Persistent Memory (XRMEM on X8M/X9M) cache. Read-only; use it before a LIST PMEMCACHE query. Only meaningful on PMEM/XRMEM-capable cells.

    Read only

  • cellcli -e "DESCRIBE METRICDEFINITION"

    Displays the attributes available for the METRICDEFINITION object type on a storage cell. Read-only; use it to understand metric definition fields such as name, description, metric type, object type, streaming, and retention policy.

    Read only

  • cellcli -e "LIST CELL ATTRIBUTES rescuePlan" > <output_file>

    Displays the cell rescuePlan attribute, a generated set of commands used after server rescue to restore settings such as thresholds and notifications. Redirecting the output is a common way to save the rescue plan for recovery documentation.

    Read only

  • cellcli -e "LIST OFFLOADGROUP ATTRIBUTES ALL"

    Displays all listed attributes for Exadata offload groups on the storage cell. Read-only; it is used to inspect offload group metadata before troubleshooting or changing offload group configuration.

    Read only

  • cellcli -e "LIST ROLE ATTRIBUTES ALL"

    Displays role metadata and privileges configured in CellCLI. This is read-only and helps review storage-cell authorization without granting, revoking, or changing any role.

    Read only

  • cellcli -e "LIST SOFTWAREUPDATE ATTRIBUTES ALL"

    Lists all attributes for the most recently scheduled Exadata storage cell software update. Read-only command used to check update name, status, store, and related metadata during patching.

    Read only

  • cellcli -e "DESCRIBE ACTIVEREQUEST"

    Displays the available attributes for the CellCLI ACTIVEREQUEST object type. Read-only; run it before building LIST ACTIVEREQUEST queries so filters and projected attributes match the storage cell's supported schema.

    Read only

  • cellcli -e "DESCRIBE DATABASE"

    Lists the attributes of the DATABASE object as tracked by an Exadata storage cell (the per-database I/O/IORM metadata the cell maintains). Read-only metadata command; run it to see available columns before building a LIST DATABASE query.

    Read only

  • cellcli -e "DESCRIBE DISKMAP"

    Lists the attributes of the DISKMAP object in CellCLI, which maps physical disk slots to LUNs, cell disks and grid disks on a storage cell. Read-only; shows the available fields before LIST DISKMAP, e.g. during a disk-replacement workflow.

    Read only

  • cellcli -e "DESCRIBE IBPORT"

    Lists the attributes of the IBPORT object on a storage cell, the field list for InfiniBand fabric port state and counters (xmtData, symbolErrs, vl15Dropped, etc.). Read-only metadata command. Note: per the docs it does not work on RoCE (Ethernet-fabric) Exadata servers.

    Read only

  • cellcli -e "DESCRIBE QUARANTINE"

    Lists the attributes available for the QUARANTINE object type in CellCLI. Read-only metadata command; it helps confirm valid fields before listing or filtering quarantine entries related to SQL plan quarantine, checksum, or cell fault isolation.

    Read only

  • cellcli -e "DESCRIBE ROLE"

    Lists the attributes of the ROLE object on a storage cell, the field list for cell user roles used in CellCLI access control. Read-only metadata; run it to see available columns before a LIST ROLE query when reviewing cell role/privilege configuration.

    Read only

  • cellcli -e "DESCRIBE THRESHOLD"

    Displays metadata for the CellCLI THRESHOLD object type. Use it to confirm valid threshold attributes before listing, creating, or changing threshold definitions.

    Read only

  • cellcli -e "LIST XRMEMCACHE ATTRIBUTES ALL"

    Displays all available attributes for the Exadata RDMA Memory Cache object. Read-only; use it when DETAIL output is not enough and a full attribute list is needed for cache configuration or latency triage.

    Read only

  • cellcli -e "DESCRIBE ALERTDEFINITION"

    Displays the attributes available for the ALERTDEFINITION object type in CellCLI. Read-only; use it to see which alert definition fields can be listed or filtered.

    Read only

  • cellcli -e "DESCRIBE SOFTWAREHISTORY"

    Displays the attributes available for the SOFTWAREHISTORY object type in CellCLI. Read-only; use it before listing historical cell software update states.

    Read only

  • cellcli -e "LIST KEY ATTRIBUTES ALL"

    Lists Exadata storage security key records with all displayed attributes. Read-only; depending on privileges and release, output can expose key aliases, key values, and key types used for ASM-scoped, database-scoped, local-cell, or remote-cell security.

    Read only

  • cellcli -e "LIST METRICSTREAM ATTRIBUTES ALL"

    Lists the metric stream records and all available attributes from CellCLI. It is read-only and helps confirm what metric streaming data the storage cell can report.

    Read only

  • cellcli -e "LIST OFFLOADPACKAGE ATTRIBUTES ALL"

    Displays all listed attributes for Exadata offload packages installed or known on the storage cell. Read-only; use it to inspect offload package metadata before troubleshooting offload capability or package state.

    Read only

  • cellcli -e "DESCRIBE IORMPROFILE"

    Lists the attributes of the IORMPROFILE object type on an Exadata storage cell. Read-only metadata command, it shows the column/field list so you can build a valid LIST IORMPROFILE query for I/O Resource Management profiles.

    Read only

  • cellcli -e "DESCRIBE PLUGGABLEDATABASE"

    Lists the attributes of the PLUGGABLEDATABASE object on an Exadata storage cell, the field list for PDB information the cell tracks (for IORM and offload). Read-only; use it before a LIST PLUGGABLEDATABASE query.

    Read only

  • cellcli -e "LIST XRMEMCACHECONTENT ATTRIBUTES ALL"

    Lists all available attributes for objects represented in Exadata RDMA Memory Cache content. Read-only command used to understand what is present in XRMEM cache during cache effectiveness analysis.

    Read only

  • cellcli -e "LIST XRMEMLOG ATTRIBUTES ALL"

    Lists all attributes for Exadata XRMEM log resources. Read-only command used to inspect low-latency log acceleration resources on XRMEM-capable systems.

    Read only

  • cellcli -e "DESCRIBE OFFLOADPACKAGE"

    Lists the attributes of the OFFLOADPACKAGE object on a storage cell, metadata about the SQL/query offload packages installed on the cell. Read-only; run it to see available fields before a LIST OFFLOADPACKAGE query when checking offload capability versions.

    Read only

  • cellcli -e "DESCRIBE KEY"

    Displays the attributes available for the KEY object type in CellCLI. Read-only; it shows the fields used for cell key metadata before creating, listing, or assigning keys.

    Read only

  • cellcli -e "DESCRIBE PMEMLOG"

    Lists the attributes available for the PMEMLOG object type on a storage cell. Read-only metadata command; use it before LIST PMEMLOG queries to confirm the field names supported on a PMEM-capable system.

    Read only

  • cellcli -e "DESCRIBE SOFTWAREUPDATE"

    Displays the attributes for the CellCLI SOFTWAREUPDATE object type. It is read-only metadata discovery used before listing or interpreting storage cell software update state.

    Read only

  • cellcli -e "DESCRIBE USER"

    Displays the attributes available for the USER object type in CellCLI. Read-only; use it to confirm user metadata fields before listing users or reviewing role assignments.

    Read only

  • cellcli -e "DESCRIBE OFFLOADGROUP"

    Lists the attributes of the OFFLOADGROUP object on a storage cell, the modifiable fields of Exadata offload groups used to manage offload services. Read-only metadata command; run it to see available columns before a LIST OFFLOADGROUP or ALTER OFFLOADGROUP.

    Read only

  • cellcli -e "DESCRIBE XRMEMCACHE"

    Displays the attributes available for the Exadata RDMA Memory Cache object type. Read-only; on supported XRMEM-capable systems it helps confirm fields before listing or managing RDMA memory cache resources.

    Read only

  • cellcli -e "DESCRIBE XRMEMCACHECONTENT"

    Displays the CellCLI attributes for the XRMEMCACHECONTENT object type. It is a read-only metadata check used before building LIST XRMEMCACHECONTENT queries for RDMA Memory Cache contents.

    Read only

  • cellcli -e "DESCRIBE XRMEMLOG"

    Displays metadata for the XRMEMLOG object type in CellCLI. Use it to confirm valid attributes before building LIST, ALTER, or support queries for XRMEMLOG.

    Read only

Collect diagnostics

  • cellcli -e "ALTER CELL VALIDATE {MAIL | SNMP | CONFIGURATION}"

    Validates storage cell alerting or configuration settings such as mail and SNMP. The command can trigger validation behavior, so run it deliberately during alerting setup or troubleshooting.

    Caution

  • ALTER CELL VALIDATE SNMP type=asr

    Validates Oracle ASR SNMP configuration on an Exadata storage cell by sending a configured validation message. It does not persistently change cell configuration, but it can generate monitoring or ASR-side test activity.

    Safe

Start, stop and move

  • ALTER CELL SHUTDOWN SERVICES ALL

    Stops RS, MS, CELLSRV, and enabled Exascale services on the target storage cell. CellCLI performs redundancy checks for CELLSRV unless an IGNORE REDUNDANCY form is used; the command is for planned maintenance, not casual triage.

    Caution

  • cellcli -e "ALTER CELL STARTUP SERVICES ALL"

    Starts all supported Exadata storage cell services through CellCLI. This is a service-state operation used after maintenance or recovery, and it should be coordinated with the database and storage availability plan.

    Caution

  • cellcli -e "ALTER CELL RESTART SERVICES ALL"

    Restarts all supported Exadata storage cell services through CellCLI. This is an operational service-state change and can affect storage availability or database I/O while services restart.

    Caution

  • cellcli -e "ALTER CELL SHUTDOWN SERVICES ALL"

    Shuts down all major services on an Exadata storage cell, including the services that provide storage access and management. This is a disruptive maintenance command, normally used only before network, service, or software work on the cell.

    Dangerous

  • cellcli -e "ALTER CELL STARTUP SERVICES MS"

    Starts the Management Server service on an Exadata storage cell. This restores cell management, monitoring, and administrative functions after a controlled MS shutdown.

    Caution

  • cellcli -e "ALTER CELL SHUTDOWN SERVICES CELLSRV"

    Shuts down the CELLSRV service on an Exadata storage cell. This can interrupt storage service availability and is normally part of a documented flash cache, grid disk, or cell maintenance procedure.

    Dangerous

  • cellcli -e "ALTER CELL STARTUP SERVICES CELLSRV"

    Starts the Cell Server (CELLSRV) service on an Exadata storage cell. It changes service state and is normally part of a maintenance or recovery sequence after CELLSRV was intentionally shut down.

    Caution

  • cellcli -e "ALTER CELL SHUTDOWN SERVICES MS"

    Shuts down the Management Server service on an Exadata storage cell. This affects cell management, monitoring, and administrative access rather than normal database I/O through CELLSRV.

    Caution

  • ALTER CELL RESTART BMC

    Restarts the Baseboard Management Controller for the target Exadata storage cell. This is a hardware-management action and can briefly affect BMC access and hardware alerting paths, even though it is not a storage data operation.

    Caution

  • cellcli -e "ALTER OFFLOADGROUP { offloadgroup1 [, offloadgroup2 ...] } { attribute=value [, ...] | STARTUP | RESTART | SHUTDOWN }"

    Alters modifiable attributes of one or more offload groups on a storage cell, or controls their lifecycle, STARTUP, RESTART, or SHUTDOWN of the offload (cellsrv offload) servers. Used when managing SQL/PL-SQL offload processing on the cell; lifecycle actions affect offload availability.

    Caution

  • cellcli -e "START /location/on/remote/server/rescue_cell.cli"

    Executes a saved CellCLI script file on the storage cell. The risk depends on the commands inside the script, which can include disruptive storage or service operations.

    Dangerous

Create and change

  • cellcli -e "ALTER GRIDDISK <GRIDDISK_NAME> INACTIVE"

    Marks the specified Exadata grid disk inactive so Oracle ASM stops using the corresponding storage path during controlled cell or disk maintenance. This changes storage-cell state and can affect ASM redundancy or availability if the wrong grid disk is targeted.

    Caution

  • cellcli -e "ALTER GRIDDISK <GRIDDISK_NAME> active"

    Marks a specified grid disk active so the corresponding ASM disk can return to online use. This is normally part of returning a cell or grid disk to service after maintenance.

    Caution

  • cellcli -e "ALTER GRIDDISK ALL ACTIVE"

    Activates all grid disks on the target Exadata storage cell. This changes ASM-visible storage state and is normally used in a controlled maintenance sequence after cell service or storage work.

    Caution

  • ALTER GRIDDISK ALL INACTIVE

    Marks all grid disks on the target cell inactive so Oracle ASM can take the corresponding ASM disks offline. It is used before storage maintenance or dropping grid disks, and it can affect database availability if redundancy is not intact.

    Caution

  • cellcli -e "ALTER GRIDDISK ALL INACTIVE"

    Marks all grid disks on the storage cell inactive, causing the corresponding ASM disks to be taken out of active service. It is used in tightly controlled maintenance workflows before cell service, cache, or storage changes.

    Dangerous

  • cellcli -e "ALTER GRIDDISK WHERE name LIKE 'DATA.*' INACTIVE"

    Marks grid disks whose names match the DATA pattern as inactive. This can make storage unavailable to ASM and must be handled as a controlled storage maintenance operation.

    Dangerous

  • cellcli -e "ALTER CELL notificationMethod='mail,snmp'"

    Configures the storage cell to send alerts using both email and SNMP notification methods. This changes alert delivery behavior for cell incidents and health events.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, share=number, role={primary|standby}), ...)

    Defines IORM dbplan directives that apply only when the database is in the specified Oracle Data Guard role. IORM automatically applies the matching directive after a switchover or failover, and role directives must be defined in primary/standby pairs.

    Caution

  • ALTER IORMPLAN objective=auto

    Sets the Exadata storage cell I/O Resource Management objective to auto. This changes storage-side resource governance on the current cell and should be applied consistently across cells when that is the intended policy.

    Caution

  • cellcli -e "ALTER CELL name=<cellname>"

    Changes the configured name of the Exadata storage cell. Affects how the cell is identified in monitoring, alerts, and management tooling. Configuration change; ensure naming conventions and any references to the old name are updated.

    Caution

  • cellcli -e "ALTER CELL smtpToAddr='<EMAIL_ADDRESS>'"

    Sets the recipient email address for storage cell alert notifications. Use it to route Exadata alert mail to the correct operations distribution list.

    Caution

  • cellcli -e "ALTER CELL flashCacheMode=WriteBack"

    Sets the storage cell flashCacheMode attribute to writeback. This is part of Smart Flash Cache configuration and usually belongs inside a larger procedure that checks physical disks, drops or recreates flash cache as required, and validates the result.

    Caution

  • ALTER IORMPLAN [ objective = iorm_objective ] [ catplan = { ( directive [, directive] ... ) | "" } ] [ dbplan = { ( directive [, directive] ... ) | "" } ] [ clusterplan = { ( directive [, directive] ... ) | "" } ]

    Changes Exadata I/O Resource Management settings on a storage server, including the IORM objective and category, database, or cluster plans. It affects storage-side workload prioritization and must be applied consistently across cells when required.

    Caution

  • cellcli -e "ALTER CELL notificationPolicy='critical,warning,clear'"

    Sets which alert severities the storage cell sends notifications for, here critical, warning, and clear events. Configuration change controlling alert delivery. Distinct from the empty-policy form: this enables notifications for the listed levels.

    Caution

  • cellcli -e "CREATE DIAGPACK packStartTime=\"now\""

    Creates a diagnostic package on the storage cell containing logs and traces for troubleshooting or Oracle Support. The original GRIDDISK syntax was not valid for CellCLI diagpacks, so this record uses the documented packStartTime form.

    Safe

  • ALTER IORMPLAN dbplan=((name={db_name | profile_name}, share=number), ...)

    Defines an interdatabase IORM plan that allocates storage-cell I/O among databases or database profiles. Directives can use shares or level/allocation style, but a dbplan cannot mix the two allocation methods.

    Caution

  • ALTER IORMPLAN objective=basic

    Sets the Exadata storage cell I/O Resource Management objective to basic. This changes how the storage cell applies I/O resource management and can affect database workload priority.

    Caution

  • cellcli -e "ALTER CELL flashCacheMode=<writeback|writethrough>"

    Changes the Smart Flash Cache mode for an Exadata storage cell between write-back and write-through. This is a configuration-changing operation and normally belongs inside a documented flash cache change procedure, not a casual one-liner.

    Caution

  • cellcli -e "ALTER FLASHCACHE ALL FLUSH"

    Flushes dirty write-back Smart Flash Cache content from all flash cache objects on the cell. It is used before dropping or changing flash cache mode so cached writes reach disk first.

    Caution

  • cellcli -e "CREATE CELLDISK ALL"

    Creates cell disks for all candidate physical devices on the storage cell. This is a storage-configuration operation used during deployment, expansion, or replacement workflows and can affect every eligible disk on the cell.

    Caution

  • cellcli -e "CREATE GRIDDISK { ALL [ FLASHDISK | HARDDISK ] | <gd1>,<gd2>,... } [ CELLDISK=<cd> ] [, size=<n>G ]"

    Creates grid disks on the cell, either on all matching cell disks (ALL HARDDISK / FLASHDISK) or on named cell disks, making new storage available to ASM. Writes new grid-disk objects; commonly used during deployment, storage build-out, or recovery. Optional size carves a slice of each cell disk.

    Caution

  • cellcli -e "CREATE FLASHCACHE ALL"

    Creates Exadata Smart Flash Cache on all eligible flash cell disks in the target storage cell. It changes cache configuration and consumes available flash-cell-disk space for cache use.

    Caution

  • ALTER CELL smtpFromAddr='exadata_dl@gs.com'

    Changes the SMTP sender address used by storage-cell alert email. This is a CellCLI configuration change, so it affects how cell alerts appear to mail systems and recipients.

    Caution

  • CREATE CELLDISK { ALL [[ CAPACITYOPTIMIZED | PERFORMANCEOPTIMIZED ] FLASHDISK | HARDDISK] | cdisk1 attribute_name=value,[attribute_name=value]... [FORCE] | ((name=cdisk2,attribute_name=value,[attribute_name=value]...) [,(name=cdisk3,attribute_name=value,[attribute_name=value]...)]...) }

    Creates Exadata cell disk objects and assigns their initial attributes. The ALL form automatically creates cell disks across matching hard or flash devices; named forms create specific cell disks with supplied attributes.

    Caution

  • CREATE FLASHCACHE CELLDISK='fd_01,fd_02,fd_03,fd_04' [, size=fc_size]

    Creates Exadata Smart Flash Cache on a specified list of flash cell disks, optionally with a defined cache size. Use this form when only selected flash cell disks should back flash cache instead of every available flash cell disk.

    Caution

  • cellcli -e "CREATE GRIDDISK <grid_disk_name> CELLDISK=<cell_disk_name>, SIZE=<size>"

    Creates a named grid disk from a specified cell disk and assigns an explicit size. This is a storage provisioning operation used during deployment, expansion, or repair workflows before ASM consumes the disk.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK PREFIX=data03"

    Creates grid disks across all hard disk cell disks using the data03 prefix. It changes storage layout and is normally part of deployment, cell expansion, or storage rebuild work.

    Caution

  • cellcli -e "ALTER CELL notificationPolicy=''"

    Clears the storage cell's notification policy by setting it to an empty value, so the cell no longer sends alert notifications for the configured severities. Reduces alert visibility, distinct from setting an explicit policy. Use deliberately, as it can suppress important alerts.

    Caution

  • cellcli -e "CREATE CELLDISK cdisk04 physicalDisk='I2:1:2'"

    Creates a named cell disk on the specified physical disk or LUN. This initializes an Exadata storage object that can be used for grid disk creation, so the physical disk mapping must be exact.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, limit=number), ...)

    Adds or changes the limit attribute in an IORM database-plan directive to cap a database's storage I/O utilization. It is a resource-governance setting, not a read-only observation, and can throttle the named database under load.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK PREFIX=<grid_disk_prefix>, SIZE=<size>, CACHINGPOLICY=<policy>"

    Creates grid disks on hard disk cell disks using a common prefix and shared attributes. The ALL scope can create multiple ASM-facing storage objects on the target cell, so the naming and sizing must match the intended disk group layout.

    Caution

  • CREATE GRIDDISK data1_CD_00_cell01,data1_CD_01_cell01,data1_CD_02_cell01 size=75G, availableTo='asm1,db1'

    Creates grid disks on the listed cell disks and presents them to ASM via availableTo. Grid disks are the storage units ASM consumes from an Exadata cell, so this is a storage build-out / reconfiguration step, not a read. Validate cell-disk names, size, and ASM ownership before running.

    Caution

  • cellcli -e "CREATE CELLDISK ALL FLASHDISK"

    Creates cell disks on eligible flash devices in the Exadata storage cell. It initializes flash-backed storage objects, so it is used only during controlled storage build, replacement, or recovery workflows.

    Caution

  • CREATE FLASHCACHE ALL [size=fc_size]

    Creates Exadata Smart Flash Cache on all flash cell disks in a storage cell, optionally limiting the cache size. If no size is specified, all available space on the selected flash cell disks is used.

    Caution

  • CREATE QUARANTINE quarantineType=<TYPE> quarantinePlan="SYSTEM", dbUniqueName=<DB_UNIQUE_NAME>[, <ATTRIBUTE_NAME>=<ATTRIBUTE_VALUE>]...

    Manually creates a CELLSRV quarantine, commonly to isolate a known problem SQL statement or plan. Oracle documents manual quarantine creation as a support-coordinated action, not routine tuning.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK PREFIX=dbfs"

    Creates grid disks on all eligible hard-disk cell disks in the target storage cell using the dbfs prefix. The resulting grid disks are storage-cell objects that can later be discovered and consumed by ASM or Exascale workflows.

    Caution

  • cellcli -e "CREATE CELL <name> interconnect1=<value1>, interconnect2=<value2>"

    Creates or initializes a cell object with cell-level attributes such as interconnect values. It is a deployment or recovery command, not routine operations, because it changes foundational storage-cell configuration.

    Caution

  • cellcli -e "CREATE CELLDISK ALL HARDDISK"

    Creates cell disks on all eligible hard disks in the Exadata storage cell. It initializes storage objects that can later be used to create grid disks, so it belongs in controlled build, replacement, or recovery workflows.

    Caution

  • cellcli -e "CREATE THRESHOLD metric_name.metric_id attribute=value [, ...]"   # also DBMCLI

    Creates a threshold object that specifies the conditions (warning/critical levels, comparison, occurrences, observation window) under which a metric alert is generated for a given metric. Available in both CellCLI (storage cell) and DBMCLI (database server). Writes new alerting configuration.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK PREFIX='data01,data02', size='500G,300G'"

    Creates multiple hard-disk-backed grid disks on the storage cell using paired prefix and size values. This initializes ASM-visible storage objects and is normally part of deployment, cell expansion, or controlled reconfiguration.

    Caution

  • cellcli -e "ALTER IORMPLAN objective=low_latency"

    Sets the Exadata IORM optimization objective to low_latency. This favors critical OLTP latency over maximum throughput and changes how the storage cell schedules I/O.

    Caution

  • cellcli -e "CREATE GRIDDISK <reco_grid_disk_name> CELLDISK=<cell_disk_name>, SIZE=<size>"

    Creates a grid disk intended for a recovery-area disk group from a specified Exadata cell disk. It is the same CellCLI CREATE GRIDDISK operation, with naming and sizing aligned to the RECO storage layout.

    Caution

  • cellcli -e "CREATE GRIDDISK data3_CD_03_cell01 CELLDISK=CD_03_cell01"

    Creates one named grid disk on a specific cell disk. It is used when rebuilding or provisioning a precise grid-disk layout instead of creating grid disks across all disks with a prefix.

    Caution

  • cellcli -e "IMPORT CELLDISK { ALL | cdisk_name | LUN lun_id | cdisk_name LUN lun_id } [ comment='text' ] [ FORCE ]"

    Reinstates all exported cell disks (or a specific one, identified by cell-disk name and/or LUN ID) on the cell into which the physical drives were moved, the counterpart to EXPORT CELLDISK. Brings the relocated disks and their grid disks back online on the new cell. ASM-scoped or DB-scoped security must be reconfigured around the export/import.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL PREFIX=data10, availableTo='+asm,db1,db2'"

    Creates grid disks with an availability scope that limits which consumers can access them. This changes ASM-visible storage configuration and is specific to newer Exadata storage workflows.

    Caution

  • ALTER CELL hardDiskScrubInterval=weekly

    Sets the hard disk scrub interval on a storage cell. This changes a background hardware maintenance schedule used to detect and correct disk media issues.

    Caution

  • CREATE FLASHLOG { ALL [ FLASHDISK ] [ size=log_size ] | CELLDISK='cdisk1[,cdisk2]...' [ , size=log_size ] }

    Creates Exadata Smart Flash Log on a storage cell for redo log write acceleration. Oracle recommends creating flash log before flash cache when both consume flash space so each object receives the intended allocation.

    Caution

  • cellcli -e "ALTER IORMPLAN catplan=\"\", dbplan=\"\", clusterplan=\"\""

    Clears the category, database, and cluster directives from the Exadata IORM plan in one change. This can materially alter I/O prioritization across all workloads using the cell.

    Caution

  • cellcli -e "CREATE GRIDDISK DATAC1_CD_01_dbm01celadm04 CELLDISK=CD_01_dbm01celadm04, SIZE=<size>, CACHINGPOLICY=default"

    Creates an Exadata grid disk from a cell disk so ASM can use the storage. This is a storage layout change; the grid disk name, backing cell disk, size, and caching policy must match the disk group design.

    Caution

  • cellcli -e "ALTER CELL snmpSubscriber-=((host=myhost,port=162,community=snmpcommunity,type=v1))"

    Removes a matching SNMP subscriber target from the storage-cell alert subscriber list. The corrected `-=` operator preserves other subscribers while removing the specified target.

    Caution

  • cellcli -e "ALTER CELL pwdExpWarnInDays=<n>"

    Sets how many days before password expiry the storage cell begins issuing expiry warnings for cell users. Security/access configuration change; affects only warning timing, not the actual expiry or authentication. Use under approved security policy.

    Caution

  • cellcli -e "ALTER CELL hardDiskScrubStartTime='<timestamp|now>'"

    Sets the scheduled start time for proactive hard disk scrubbing on an Exadata storage cell. Disk scrubbing inspects and repairs hard disks in the background, so this changes maintenance timing rather than immediately querying state.

    Caution

  • cellcli -e "ALTER CELL mailServer='mail.gs.com'"

    Sets the email relay host used by the storage cell for alert notifications. The source row used `smtpServer`, but current CellCLI documentation identifies the relay-host attribute as `mailServer`.

    Caution

  • cellcli -e "ALTER IBPORT { ALL | port [, port ...] } RESET COUNTERS"   # also DBMCLI; not for RoCE-only racks

    Performs an action on all or specified InfiniBand Network Fabric ports, chiefly RESET COUNTERS to zero the per-port error/traffic counters. Available in both CellCLI and DBMCLI. Note: this command does not work on RoCE Network Fabric (Ethernet) hardware. Resets counters only; does not change port configuration.

    Safe

  • ALTER GRIDDISK grid_disk_name CACHINGPOLICY="none"

    Sets a grid disk caching policy to none, effectively disabling flash caching for database files on that grid disk. This is a storage performance configuration change, not a read-only check.

    Caution

  • ALTER IORMPLAN dbplan="", catplan=""

    Clears the interdatabase plan and the legacy category plan on a storage cell in one ALTER IORMPLAN call. The dbplan reset remains a current IORM operation, while catplan is legacy and is not supported from Exadata System Software 25.1.0 onward.

    Caution

  • cellcli -e "ALTER CELL BBU REENABLE"

    Re-enables the hard disk controller battery-backed unit after the same battery has been removed and reinserted. Oracle documents that this changes caching policy back from writethrough to writeback and turns off the locator LED.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL PREFIX=sales, size=75G, availableTo='cluster1'"

    Creates grid disks using the sales prefix and restricts access with the availableTo attribute. This is a storage provisioning command that also applies client access control for the resulting grid disks.

    Caution

  • cellcli -e "CREATE GRIDDISK data2_CD_00_cell01,data2_CD_01_cell01,data2_CD_02_cell01 size=75G, availableTo='asm1,db2'"

    Creates specific named grid disks and restricts access to the ASM and database aliases listed in availableTo. This provisions storage while applying Exadata storage-server security scoping.

    Caution

  • cellcli -e "CREATE USER celladministrator PASSWORD=*"

    Creates an Exadata storage cell user named celladministrator and prompts for the password instead of placing it on the command line. This changes storage-cell security state and is normally paired with a role grant such as administrator or a monitoring role.

    Caution

  • cellcli -e "ALTER THRESHOLD { ALL | threshold_name [, threshold_name ...] } attribute_name=attribute_value [, ...]"   # also DBMCLI

    Updates attribute values (e.g. warning/critical levels, occurrences, observation) of all thresholds or specified metric-alert thresholds. Available in both CellCLI (storage cell) and DBMCLI (database server). Writes threshold configuration that governs when metric alerts fire; does not generate or clear alerts itself.

    Caution

  • CREATE CELLDISK cdisk03 lun=0_3

    Creates a named cell disk object on an Exadata storage cell using the specified LUN. Cell disks are the layer between physical storage/LUNs and grid disks, so this changes storage-cell configuration and writes cell disk metadata.

    Caution

  • CREATE FLASHCACHE CELLDISK='fd_01_mycell,fd_02_mycell', size=64G

    Creates Exadata Smart Flash Cache on the listed flash cell disks and limits the cache to the requested size. This changes storage-cell cache configuration and affects database I/O caching behavior on the cell.

    Caution

  • CellCLI> CREATE USER cellmon PASSWORD=*

    Creates a named user on an Exadata storage server from CellCLI (or ExaCLI), typically a low-privilege monitoring account such as cellmon that is later granted a view-only role. This writes a new cell-level credential, so it changes the security posture of the storage cell. Note: this is CellCLI/cell syntax (PASSWORD=*), not SQL CREATE USER.

    Caution

  • cellcli -e "ALTER CELL PMEMCacheMode=<writeback|writethrough>"

    Sets the PMEM cache mode on PMEM-capable Exadata storage cells. Current documentation notes that PMEM cache operates only in write-through mode from Exadata System Software 23.1.0 onward, so write-back is an older-release concern.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, flashCacheLimit=<size>), ...)"

    Sets a soft maximum amount of Exadata Smart Flash Cache available to a database in the IORM plan. The database may exceed the limit when free cache exists, so this is a governance control rather than a hard quota.

    Caution

  • cellcli -e "CREATE CELL cell22 interconnect1=bondib0"

    Creates a CellCLI CELL object with an explicit cell name and initial interconnect1 setting. CREATE CELL can also create default Exadata Smart Flash Cache, Smart Flash Log, and associated cell disks depending on platform and attributes.

    Caution

  • cellcli -e "CREATE PMEMCACHE ALL"

    Creates the Persistent Memory cache on all available PMEM cell disks for a supported storage cell. It changes cache layout and is typically used after PMEM cache mode changes, cell replacement, or elastic configuration work.

    Caution

  • cellcli -e "ALTER CELL snmpSubscriber=((host='xx.xx.xx.xx',port=162,community='public',type=ASR,asrmPort=8234))"

    Configures an SNMP subscriber target for storage-cell alerts, here using an ASR-style subscriber with an ASR Manager port. This replaces the current `snmpSubscriber` value unless the add/remove operators are used.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK PREFIX=SPARSE, size=56G, virtualSize=560G"

    Creates sparse grid disks across all hard-disk cell disks, where virtualSize exceeds the physically allocated size, used for snapshot/sparse disk groups that present more capacity than is physically reserved. Writes new grid disks on the cell that ASM can then consume.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, flashcachemin=number), ...)

    Sets the minimum amount of Exadata Smart Flash Cache guaranteed to a database, even for cold blocks. In a full cache, increasing one database's flashCacheMin effectively takes cache space away from other databases.

    Caution

  • ALTER IORMPLAN dbplan=((name=profile_name, type=profile, share=number), ...)

    Uses the type attribute to define a dbplan directive as a reusable profile rather than a specific database directive. Profiles make IORM plan management easier in environments with many databases that should share the same resource template.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, flashcache={on|off}), ...)"

    Sets whether a database can use Exadata Smart Flash Cache through an IORM database-plan directive. This changes storage-cache access for the targeted workload and can affect latency and cache availability for other databases.

    Caution

  • cellcli -e "ALTER CELL listeningInterface='bondeth0'"

    Changes the network interface a storage cell uses for client/listener traffic. Reconfigures cell networking, so an incorrect interface can cut the cell off from the database servers. Use only under an approved network change with rollback guidance.

    Caution

  • ALTER CELL bbuLearnCycleTime="2013-01-22T02:00:00-08:00"

    Sets the start time for the storage cell battery backup unit learn cycle. This changes hardware maintenance scheduling and can affect write-back cache behavior while the learn cycle runs.

    Caution

  • ALTER CELL emailSubscriber=""

    Clears the configured email subscriber list for storage cell alert notifications. This can suppress cell alert email delivery if no other notification path is configured.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK prefix=pool1, storagepool=POOL1"

    Creates hard-disk-backed grid disks and associates the pool disk metadata with a named Exascale storage pool. This changes storage-cell metadata and is used in Exascale pool disk workflows.

    Caution

  • ALTER IORMPLAN catplan = (( name=category_name, ... ) ... )

    Configures the IORM category plan directives on an Exadata storage server. Category plans control storage I/O allocation by workload category, so the change can alter performance priority across databases and applications.

    Caution

  • ALTER IORMPLAN catplan=((name=category_name, level=number, allocation=number), ...)

    Defines legacy category-plan directives that allocate storage I/O by workload category using level and allocation values. Category plans are deprecated from Exadata System Software 21.2.0 and removed in 25.1.0, so this belongs only to older estates.

    Caution

  • ALTER IORMPLAN clusterplan=((name=cluster_name, share=number, limit=number), ...)

    Defines an IORM cluster plan for sharing storage-cell I/O across Oracle Grid Infrastructure clusters. The cluster name must match the ASM-scoped security identity, otherwise the cluster is not associated with the directive.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, flashcachesize=number), ...)

    Sets a hard maximum amount of Exadata Smart Flash Cache available to a database through an IORM dbplan directive. The database cannot exceed this quota, so a value below current cache occupancy can cause cache contents for that database to be cleared over time.

    Caution

  • cellcli -e "ALTER CELL bbuLearnSchedule = \"MONTH 1 HOUR 3 SECOND 59\""

    Changes the battery backup unit learn cycle schedule on an Exadata storage cell. This is a storage cell configuration change and should match Oracle guidance or an approved maintenance plan.

    Caution

  • cellcli -e "ALTER CELL syslogconf=('*.err;authpriv.none @loghost','*.emerg @loghost')"

    Adds syslog forwarding rules for storage-cell messages using syslog selector syntax. This extends local syslog behavior so selected events are forwarded to a management loghost.

    Caution

  • cellcli -e "ALTER CELLDISK { ALL [ FLASHDISK | HARDDISK ] | cdisk_name [, cdisk_name ...] } attribute=value [, ...]"

    Changes attributes of all cell disks or specified cell disks on a storage cell, for example setting a comment, or (release 24.1.0+) toggling CAPACITYOPTIMIZED. The FLASHDISK/HARDDISK keyword scopes ALL to just flash or just hard disks. Writes cell-disk configuration; storage-layout-affecting attributes should be changed with care.

    Caution

  • cellcli -e "ALTER GRIDDISK <GRIDDISK_NAME> CACHINGPOLICY='default'"

    Changes the caching policy for a specific Exadata grid disk back to the default setting. This affects how grid disk data participates in Exadata flash cache behavior.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, flashlog={on|off}), ...)"

    Sets whether a database can use Exadata Smart Flash Log through an IORM database-plan directive. This changes commit-latency behavior for the targeted workload and should be tied to a deliberate resource-management decision.

    Caution

  • cellcli -e "ASSIGN KEY FOR LOCAL CELL '<CELL_NAME>'='<KEY_HEX>'"

    Assigns the local-cell key used by Exadata storage security and cell-to-cell operations. This writes sensitive key configuration on a storage server and must match the documented security workflow.

    Caution

  • cellcli -e "CREATE CELL [<name>] [interconnect1=<interface>] [, attributeName=<value> ...]"

    Creates the CellCLI CELL object and assigns initial attributes such as name, interconnects, or other cell-level settings. It is a deployment or recovery command, not routine incident triage.

    Caution

  • cellcli -e "CREATE CELL httpsAccess='192.168.10.0/24'"

    Creates a CellCLI CELL object and restricts HTTPS access to the Exadata RESTful service to the specified IPv4 subnet. The httpsAccess setting controls which source addresses can reach the HTTPS service.

    Caution

  • SET DATEFORMAT {LOCAL | STANDARD}

    Sets the date display format for the current CellCLI session. STANDARD is recommended for scripts because it is less sensitive to region, locale, and time-zone display differences.

    Safe

  • cellcli -e "ALTER CELL smtpFrom='exadata-alerts'"

    Sets the sender name used in storage cell alert email messages. Use it to make Exadata cell alerts identifiable to mail systems and operations teams.

    Caution

  • ALTER CELL accessLevelTemp=((accessLevel="remoteLoginEnabled", duration="<duration>", reason="Quarterly maintenance"))

    Temporarily changes the storage cell access level to allow remote login for a bounded maintenance window. The setting is security-sensitive and should revert after the configured duration.

    Caution

  • ALTER GRIDDISK size=5T WHERE name like 'RECO.*'

    Resizes grid disks matching the WHERE filter, here the RECO-named grid disks on the target cell. This changes Exadata storage allocation and must be coordinated with ASM capacity and rebalance planning.

    Caution

  • ALTER IORMPLAN catplan=""

    Clears the category plan on a storage cell by resetting the catplan attribute. This is a legacy IORM control: category plans were deprecated in Exadata System Software 21.2.0 and removed in 25.1.0, so it is not a current 25.x/26.x configuration command.

    Caution

  • ALTER PMEMCACHE { ALL | CELLDISK="cdisk1 [,cdisk2] ..." [FORCE] }

    Alters the set of cell disks used by the Exadata PMEM cache. This changes storage-cell cache configuration and can affect cache availability or maintenance workflows.

    Caution

  • ALTER QUARANTINE { ALL | <QUARANTINE_NAME>[,<QUARANTINE_NAME>]... } <ATTRIBUTE_NAME>=<ATTRIBUTE_VALUE>[, <ATTRIBUTE_NAME>=<ATTRIBUTE_VALUE>]...

    Changes modifiable attributes for one or more CELLSRV quarantines. It is a support-sensitive configuration change because quarantines affect how problem SQL statements or plans are isolated on the storage cell.

    Caution

  • cellcli -e "ALTER CELL eighthRack=true"

    Sets the Eighth Rack configuration flag on a storage cell. This changes hardware configuration metadata and should only be used in supported Exadata configuration workflows.

    Caution

  • cellcli -e "ALTER CELL iotimeoutthreshold='5s'"

    Changes the storage-cell I/O timeout threshold. If an I/O exceeds the threshold, the I/O can be canceled and redirected by Oracle ASM to another mirror copy, so the setting directly affects failure handling behavior.

    Caution

  • cellcli -e "ALTER SOFTWAREUPDATE store=\"https://my-exa-store/cell\""

    Sets the Exadata storage server software update store URL used by CellCLI for scheduled or immediate software update operations. This writes the update source location; it does not itself start an upgrade unless paired with time, VALIDATE PREREQ, or UPGRADE actions.

    Caution

  • cellcli -e "ASSIGN KEY FOR LOCAL CELL 'cell01'='fa292e11b31b210c4b7a24c5f1bb4d3'"

    Assigns local key material for an Exadata storage cell so secured cell-to-cell operations can identify that cell. This writes security-sensitive configuration on the target cell; the key value must be treated as secret material.

    Caution

  • cellcli -e "CREATE FLASHLOG ALL SIZE=1G"

    Creates Oracle Exadata Smart Flash Log on all eligible flash devices in the target storage cell and allocates the requested log size. This is normally used during cell deployment, recovery, or controlled storage reconfiguration.

    Caution

  • cellcli -e "CREATE GRIDDISK SPARSEC1_CD_08_dbm01celadm04"

    Creates a named grid disk on the storage cell, here using a sparse-disk naming convention. It changes storage layout and is normally used during recovery, sparse disk rebuilds, or controlled storage configuration.

    Caution

  • cellcli -e "CREATE FLASHLOG ALL"

    Creates Exadata flash log objects on all eligible flash devices in the storage cell. This is a storage configuration action that affects write logging behavior and should be treated as maintenance.

    Dangerous

  • cellcli -e "ALTER GRIDDISK ALL availableTo='+asm'"

    Restricts all grid disks on a cell to the Oracle ASM client by setting availableTo to +asm. This changes Exadata storage access control and can remove database clients from grid disk access.

    Dangerous

  • cellcli -e "ALTER CELL remotePwdChangeAllowed=true"

    Enables remote password changes for the storage cell, allowing cell user passwords to be changed from outside a direct cell session. Security-sensitive access configuration; broadens how credentials can be modified. Use only with approval and an audit trail.

    Caution

  • cellcli -e "ALTER CELL snmpuser.user2=(authprotocol=SHA,authpassword=*)"

    Adds or updates the individual SNMP user `user2` with SHA authentication for SNMP alerting. The `*` password marker causes CellCLI to prompt for the password instead of storing it in the command line.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, pmemcachelimit=number), ...)

    Sets a soft maximum amount of PMEM cache available to the named database. If the PMEM cache is not full, the database can exceed this limit, so it is a governance target rather than a hard ceiling.

    Caution

  • CREATE PMEMLOG { ALL [ size=log_size ] | CELLDISK='cdisk1[,cdisk2]...' [ , size=log_size ] }

    Creates Persistent Memory Log on supported Exadata storage cells for redo log write requests. This command applies to Exadata X8M/X9M-class systems with PMEM devices and is part of cell storage initialization or repair.

    Caution

  • cellcli -e "ALTER CELL interconnect1='re0', interconnect2='re1'"

    Sets the RDMA Network Fabric interconnect interfaces recorded for the storage cell. This is a network configuration change and may require service restart steps before the cell is fully aligned with the fabric.

    Caution

  • cellcli -e "ALTER CELL pmemCacheMode=writeback"

    Changes the PMEM cache mode of a storage cell to writeback where that mode is supported and matches the rest of the cluster. In current 26ai documentation, Oracle notes that writeback PMEM cache is legacy and write-through is the only supported mode starting with Exadata System Software 23.1.0.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=\"\""

    Clears the database plan directives from the Exadata storage cell IORM plan. This changes storage-side I/O governance for databases on the cell while leaving other IORM plan sections untouched.

    Caution

  • cellcli -e "ASSIGN KEY FOR LOCAL CELL"

    Assigns key material used by the local storage cell for secured cell-to-cell or client access workflows. The command changes security state on the cell, and incorrect keys can block expected access until corrected.

    Caution

  • cellcli -e "CREATE PMEMCACHE CELLDISK='cdisk1[,cdisk2]...' [ , size=cache_size ]"

    Creates persistent memory cache on a specified set of PMEM cell disks, optionally with an explicit cache size. This changes storage-cell cache configuration and applies only to PMEM-capable Exadata X8M and X9M storage servers.

    Caution

  • cellcli -e "CREATE PMEMLOG ALL"

    Creates persistent memory log resources on a PMEM-capable Exadata storage cell for redo log write requests. The ALL form creates the PMEM log using available PMEM cell disks according to the platform procedure.

    Caution

  • cellcli -e "EXPORT CELLDISK { ALL | cdisk_name }"

    Prepares all cell disks or a specified cell disk before physically moving (importing) the disk into a different storage cell, flushing dirty cached data and marking the disk as exported. Used as the first step of an EXPORT/IMPORT CELLDISK migration, typically when a cell is failing. Failing to export can cause data loss when dirty data is not flushed.

    Caution

  • cellcli -e "ALTER CELL snmpuser.user2=''"

    Removes the individual SNMP user `user2` from the storage-cell SNMP user configuration. This changes who can be used for SNMP v3 alert subscriptions and can break subscribers that still reference the user.

    Caution

  • ALTER PMEMCACHE { ALL | CELLDISK="cdisk1 [,cdisk2] ..." [FORCE] } { FLUSH [NOWAIT] | CANCEL FLUSH }

    Flushes dirty blocks from Exadata PMEM cache for all cell disks or a specified set, or cancels a previous flush operation. This is a storage-cell maintenance command and can affect readiness for PMEM cache drop or hardware work.

    Caution

  • ALTER CELL alertSummaryInterval=weekly

    Sets how often the storage cell sends open-alert summary email. This changes notification cadence for cell alerts without clearing or creating alerts.

    Caution

  • ALTER CELL emailFormat='text'

    Sets the storage cell alert email format to text. This changes notification formatting only, but it should still match the team's mail processing and monitoring expectations.

    Caution

  • cellcli -e "ALTER CELL emailFormat='html'"

    Changes the email format used for storage cell alert notifications. Use it when aligning Exadata alert mail formatting with monitoring or operations requirements.

    Caution

  • ALTER CELL accessLevelPerm="remoteLoginEnabled"

    Permanently changes the storage cell default access level to enable remote login. This alters the cell security posture and should be tied to an approved access policy.

    Caution

  • ALTER GRIDDISK ALL availableTo=''

    Clears the availableTo security attribute from all grid disks on the target cell. This changes ASM-scoped access control for storage presented to Oracle ASM, so a wrong target or wrong security plan can affect database storage access.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, pmemcache={on|off}), ...)

    Controls whether the named database can use PMEM cache through an IORM dbplan directive. On X8M and X9M storage servers, pmem attributes are accepted as PMEM-era names for XRMEM resources, but PMEM and XRMEM attribute names cannot be mixed in the same IORM plan.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, xrmemcachemin=number), ...)

    Sets the minimum amount of Exadata XRMEM cache guaranteed to the named database. The value is a hard reservation, and the sum of xrmemCacheMin values across directives should stay below the available XRMEM cache size.

    Caution

  • CREATE XRMEMCACHE

    Creates the Exadata RDMA Memory Cache on supported storage servers. Starting with X10M, the cache attributes are configured automatically and the command takes no additional arguments.

    Caution

  • cellcli -e "ALTER CELL accessLevelPerm = remoteLoginDisabled"

    Permanently sets the storage cell access level so remote login is disabled. This is a security configuration change that affects administrative access to the cell.

    Caution

  • cellcli -e "ALTER CELL pwdExpInDays=<DAYS>"

    Changes the password expiration interval for storage cell users. This is a security policy change that affects credential lifecycle enforcement on the cell.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, asmcluster=<asm_cluster_name>, ...), ...)"

    Adds the asmcluster attribute to an IORM database-plan directive so the database name is qualified by its Oracle ASM cluster. This is used when the same database name can exist in different ASM clusters and ASM-scoped security is configured.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, pmemlog={on|off}), ...)"

    Sets whether a database can use PMEM log through an IORM database-plan directive on PMEM-capable systems. This changes redo-log acceleration policy for the targeted workload.

    Caution

  • cellcli -e "ASSIGN KEY FOR LOCAL CELL '<cell_name>'='<key_value>'"

    Assigns local cell key material used by Exadata storage cell security workflows. This changes security-sensitive configuration and the key value must be handled as secret material.

    Caution

  • cellcli -e "CREATE GRIDDISK ALL HARDDISK PREFIX=pool1, storagepool=my-pool1"

    Creates hard-disk grid disks associated with an Exascale storage pool. The storagepool attribute makes the newly created grid disks pool disks for Exascale rather than regular Exadata grid disks.

    Caution

  • ALTER CELL syslogformat=""

    Sets the cell syslogFormat attribute to an empty string, which reverts Exadata storage cell syslog message formatting to the default. This changes alert/log formatting behavior on the target cell; it does not inspect state only.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, pmemcachesize=number), ...)

    Sets a hard maximum amount of PMEM cache available to the named database. The configured size cannot be exceeded; from Exadata System Software 20.1.0, lowering it below current occupancy can proactively clear excess cached data.

    Caution

  • cellcli -e "ALTER CELL accountLockInDays=<DAYS>"

    Changes the storage cell account lock duration setting. This is a security policy configuration change that affects how long accounts remain locked after policy-triggering events.

    Caution

  • cellcli -e "ALTER CELL accessLevelTemp=''"

    Clears the temporary access level setting on a storage cell. Use it after approved temporary access has expired or when restoring normal access policy.

    Caution

  • cellcli -e "ALTER CELL metricStreamIntvlInSec=<seconds>"

    Sets the interval (in seconds) at which the storage cell streams metrics; setting it to 0 disables metric streaming. Configuration change to cell monitoring behavior, not the data path. Use under an approved change so monitoring/telemetry expectations stay aligned.

    Caution

  • ALTER CELL diagPackEmailAttach=FALSE

    Disables attaching diagnostic packages to storage cell alert emails. Diagnostic packages are still generated, but email delivery no longer includes the package attachment.

    Caution

  • ALTER CELL diagPackUploadEnabled=FALSE

    Disables automatic upload of storage cell diagnostic data to a service request through Oracle ASR. This changes support data flow, not local diagpack generation.

    Caution

  • ALTER CELL httpsAccess="192.168.10.0/24"

    Restricts HTTPS access to the Exadata RESTful service on a storage cell to the specified IP subnet or host list. This is a configuration change on the cell, not a database command, and it can block management clients if the access list is wrong.

    Caution

  • ALTER GRIDDISK data011 name='data0_CD_03_cell04'

    Renames a specific Exadata grid disk. If the grid disk belongs to an ASM disk group, the corresponding ASM disk should be offline before the name change.

    Caution

  • ALTER XRMEMCACHE { ALL | CELLDISK='<CELLDISK_LIST>' [FORCE] } [ FLUSH [NOWAIT] | CANCEL FLUSH ]

    Alters the XRMEM cache on supported X8M and X9M storage servers using the PMEM cache command semantics. It can change the cell disks used by cache or flush dirty cache data, which may pause new caching until CELLSRV restarts or the flush is canceled.

    Caution

  • CREATE XRMEMLOG { ALL [ size=<LOG_SIZE> ] | CELLDISK='<CELLDISK_LIST>' [, size=<LOG_SIZE>] }

    Creates the Exadata RDMA Memory Log using the documented PMEM log semantics on supported X8M and X9M systems. The log is used for redo log write acceleration and consumes persistent memory or XRMEM resources on the selected cell disks.

    Caution

  • cellcli -e "ALTER CELL enableSmartStorage=true"

    Enables Smart Storage behavior on the storage cell. This changes cell configuration that can affect Exadata offload behavior and should be performed only under an approved support or maintenance plan.

    Caution

  • cellcli -e "ALTER CELL ilomSyslogClients=\"192.0.2.101,192.0.2.201\""

    Configures up to two remote loghost destinations for ILOM service processor syslog messages from a storage cell. This changes where management-controller events are forwarded and persists across restarts.

    Caution

  • cellcli -e "ALTER CELL iotimeoutthreshold=''"

    Clears the storage cell I/O timeout threshold attribute. This changes how the cell handles or reports I/O timeout behavior and should be tied to a support or maintenance reason.

    Caution

  • cellcli -e "ALTER CELL syslogconf=''"

    Removes the configured extra syslog forwarding rules from a storage cell. This stops the cell from forwarding messages through those `syslogconf` rules while leaving local logging behavior in place.

    Caution

  • cellcli -e "ALTER CELL traceLevel=''"

    Clears the storage cell trace level setting. Use it to restore normal diagnostic tracing after troubleshooting or support-directed tracing is complete.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<DB_NAME>, xrmemcachelimit=<NUMBER>))"

    Updates the interdatabase IORM plan for a database directive and sets the soft maximum amount of XRMEM cache that the database can use on the storage cells. This is a storage-side resource governance change, not a database parameter change.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, pmemCacheMin=<size>), ...)"

    Sets a guaranteed minimum PMEM cache quota for a database in the Exadata IORM plan. It changes how persistent-memory cache capacity is reserved across databases on the storage cells.

    Caution

  • cellcli -e "CREATE CELL eighthRack=true"

    Creates a CELL object while enabling Eighth Rack configuration. Oracle documents this for supported quarter-rack or later systems and notes that it requires no existing cell disks because it configures only part of the hard disk and flash capacity.

    Caution

  • cellcli -e 'ALTER IORMPLAN clusterplan=""'

    Clears the clusterplan setting in the Exadata I/O Resource Management plan. This changes storage-side resource governance, so it can alter how I/O capacity is shared between clusters or workloads.

    Caution

  • ALTER CELL alertSummaryStartTime="2013-04-23T12:57:00-06:00"

    Sets the delivery time for open-alert summary email from the storage cell. This changes alert notification timing, not the alerts themselves.

    Caution

  • SET ECHO [ON | OFF]

    Controls whether commands in a CellCLI script run with @ or START are echoed to the screen. It affects script output visibility for the current CLI session and does not affect interactively entered commands.

    Safe

  • ALTER GRIDDISK size=<SIZE> WHERE storagepool=<STORAGEPOOL_NAME>

    Resizes grid disks that match a storagepool filter on the target storage cell. This is an Exascale-oriented grid disk resize pattern and changes storage allocation, so it must be coordinated with free space, ASM, and storage pool planning.

    Caution

  • ALTER IORMPLAN dbplan=((name=db_name, xrmemlog={on|off}), ...)

    Controls whether the named database can use the Exadata XRMEM log resource through an IORM dbplan directive. It is a storage-resource policy change for XRMEM-capable systems, not a diagnostic command.

    Caution

  • cellcli -e "ALTER CELL metricFGCollIntvlInSec=<SECONDS>"

    Sets the fine-grained metric collection interval for a storage cell. Smaller values increase metric granularity and can increase monitoring overhead.

    Caution

  • cellcli -e "ALTER CELL syslogInput=''"

    Clears additional local-log forwarding configured through the `syslogInput` attribute on a storage cell. This removes forwarding of selected local logs such as audit, AIDE, or YUM logs to remote log servers.

    Caution

  • cellcli -e "ALTER CELL syslogformat=\"%TIMESTAMP% %HOSTNAME% %msg%\\n\""

    Sets a custom syslog message format for storage-cell syslog output. The format string controls how forwarded or emitted syslog messages are rendered and can be cleared separately by setting an empty string.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=<db_name>, xrmemCacheSize=<size>), ...)"

    Sets a hard maximum amount of XRMEM cache available to a database in the Exadata IORM plan. Unlike a soft limit, this quota cannot be exceeded even if unused XRMEM cache is available.

    Caution

  • cellcli -e "ALTER IORMPLAN dbplan=((name=db_name, xrmemcache={on|off}))"

    Changes database-plan directives in the Exadata IORM plan to enable or disable XRMEM cache behavior for a database entry. This alters storage-side resource policy and can change cache priority or performance for affected workloads.

    Caution

Remove and drop

  • cellcli -e "ALTER PHYSICALDISK <PHYSICALDISK_NAME> DROP FOR REPLACEMENT"

    Prepares a physical disk for hot replacement by dropping it from the cell configuration when CellCLI determines it can be removed without data loss. This is a hardware maintenance action and can reduce redundancy while replacement and rebalance work completes.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL PREFIX=<grid_disk_prefix>"

    Drops every grid disk on the cell whose name matches the given prefix, removing that ASM-visible storage from the cell. Destructive: the grid disks (and the ASM disks they back) are deleted, so dependent ASM disk groups lose members. The ALL/PREFIX scope can hit many disks at once.

    Dangerous

  • cellcli -e "DROP FLASHCACHE ALL"

    Drops all Smart Flash Cache objects on the storage cell. It removes the cache layer and can severely affect performance; in write-back mode, dirty cache contents must be flushed first to avoid data loss.

    Dangerous

  • DROP QUARANTINE { ALL | <QUARANTINE_NAME>[,<QUARANTINE_NAME>]... }

    Manually removes one or more CELLSRV quarantines, or all quarantines, from a storage cell. Removing a quarantine can allow previously isolated SQL or plans to run through cell offload again.

    Caution

  • cellcli -e "DROP ALERTHISTORY { ALL | alert_id [, alert_id ...] }"   # also DBMCLI

    Removes all or specified alerts from the alert history of a storage cell (CellCLI) or database server (DBMCLI). Permanently deletes the alert records; with ALL it clears the entire history. Use ALTER ALERTHISTORY (examinedBy) instead if you only want to acknowledge rather than delete.

    Dangerous

  • cellcli -e "DROP FLASHCACHE"

    Drops the Exadata Smart Flash Cache object on the target storage cell. It removes cached contents and changes cell cache configuration, typically as part of an Oracle-documented flash cache mode or maintenance procedure.

    Dangerous

  • cellcli -e "DROP GRIDDISK <grid_disk_name> ERASE=1pass"

    Drops one named grid disk and erases its contents with a one-pass erase. This is destructive storage removal for a specific ASM-visible disk object.

    Dangerous

  • cellcli -e "DROP CELLDISK ALL"

    Drops all cell disk objects on the target storage cell. This removes storage-layer objects below grid disks and can destroy or expose data depending on the workflow and erase options used.

    Dangerous

  • cellcli -e "DROP CELLDISK CD_03_cell01 ERASE=1pass NOWAIT"

    Drops the specified Exadata cell disk and starts a one-pass erase of its contents without waiting for the erase to complete. This is a destructive storage maintenance command; it removes cell-disk metadata and begins data overwrite work on the target disk.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL PREFIX=data, ERASE=1pass"

    Drops all grid disks matching a prefix and erases their contents with a one-pass erase. This is destructive and can remove ASM-visible storage from the target cell.

    Dangerous

  • cellcli -e "DROP FLASHLOG"

    Removes Oracle Exadata Smart Flash Log from the storage cell. This is a destructive maintenance operation normally paired with a planned recreate or support-directed recovery workflow, and it can affect commit latency protection while the flash log is absent.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL PREFIX=data01"

    Drops all grid disks on the cell whose names match the data01 prefix. It removes storage objects that may be visible to ASM, so it belongs in decommissioning, rebuild, or carefully staged maintenance workflows.

    Dangerous

  • cellcli -e "ALTER CELL BBU DROP FOR REPLACEMENT"

    Marks the hard disk controller battery backup unit as dropped for replacement before BBU maintenance. The command changes caching policy from write-back to write-through and prepares the cell for hardware replacement.

    Caution

  • cellcli -e "DROP CELLDISK ALL ERASE=1pass"

    Drops every cell disk on the target Exadata storage cell and requests a one-pass overwrite of the cell disk data. This removes storage objects beneath grid disks and is normally used only for secure decommissioning, rebuild, or recovery work.

    Dangerous

  • cellcli -e "DROP CELLDISK ALL FLASHDISK"

    Drops all cell disks backed by flash devices on the target Exadata storage cell. The operation removes flash-backed cell disk objects and is used only during controlled decommissioning, secure erase, or rebuild procedures.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL FLASHDISK PREFIX=data, ERASE=7pass"

    Drops all matching flash-backed grid disks on the storage cell and performs a multi-pass erase. This is destructive storage removal that can affect ASM-visible storage and permanently wipe data from matching grid disks.

    Dangerous

  • DROP SOFTWAREHISTORY { ALL | '<UPDATE_NAME>[,<UPDATE_NAME>]...' }

    Removes all scheduled software update history or selected update history records from the storage cell. This deletes local software-update history, so it is an administrative cleanup command rather than a diagnostic query.

    Dangerous

  • cellcli -e "DROP PMEMCACHE"

    Removes the PMEM cache from an Exadata storage cell. Oracle documents that dirty data must be flushed before dropping writeback PMEM cache, because failing to do so can cause data loss.

    Dangerous

  • cellcli -e "DROP CELLDISK CD_03_cell01 ERASE=7pass FORCE"

    Drops a named cell disk and requests a seven-pass erase, forcing the operation if needed. It destroys the storage object and can remove data, so it belongs only in secure decommissioning or guided recovery procedures.

    Dangerous

  • cellcli -e "DROP FLASHLOG FORCE"

    Removes Oracle Exadata Smart Flash Log from the storage cell, forcing removal if required. It can affect redo latency and cell recovery behavior until flash log is recreated.

    Dangerous

  • cellcli -e "DROP FLASHLOG ALL"

    Drops all Exadata Smart Flash Log objects on the target storage cell. This removes low-latency redo logging resources and is intended for controlled maintenance or reconfiguration, not routine triage.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL HARDDISK PREFIX=SPARSEC1"

    Drops all hard-disk grid disks whose names match the specified prefix. This removes ASM-visible Exadata storage objects and is commonly paired with disk group drop, reconfiguration, or storage pool maintenance workflows.

    Dangerous

  • cellcli -e "DROP CELLDISK ALL FLASHDISK ERASE=7pass"

    Drops all flash-based cell disks on the target storage cell and requests seven-pass secure erase behavior where applicable. The command removes storage objects beneath grid disks and is intended for decommissioning, rebuild, or secure erase procedures.

    Dangerous

  • cellcli -e "DROP CELLDISK CD_02_cell09 ERASE=1pass NOWAIT"

    Drops the specified Exadata cell disk and starts a one-pass erase without waiting for completion. This is destructive storage-cell maintenance and can affect grid disks, ASM redundancy, and database availability if dependencies are not cleared first.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL HARDDISK PREFIX=pool1 CANCEL"

    Cancels an in-progress grid disk drop operation for matching hard-disk-backed grid disks. This changes storage maintenance state and should be used only when the active drop operation has been positively identified.

    Caution

  • cellcli -e "DROP GRIDDISK ALL HARDDISK PREFIX=pool1 PREPARE"

    Prepares Exascale pool disks on hard disks for removal by marking the matching grid disks as waiting for storage pool reconfiguration. The prepare step is a state change and is reversible before the storage pool is reconfigured, but it is part of a removal workflow.

    Caution

  • cellcli -e "DROP CELL ERASE=1pass"

    Drops the cell object and securely erases its disks using a single-pass overwrite (ERASE=1pass), wiping all data on the storage cell as part of decommissioning. Destructive and irreversible: all grid disks, cell disks, and their data are erased.

    Dangerous

  • DROP CELL [ERASE = value] [FORCE]

    Drops the Exadata storage cell configuration, optionally erasing disks as part of decommissioning or recovery. This is a destructive cell-level operation and can remove storage-cell identity and data-bearing resources.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL PREFIX=DATA ERASE=3pass"

    Drops all grid disks whose names match the DATA prefix and requests a 3-pass erase. It is a destructive command used for secure cleanup, decommissioning, or full storage rebuild workflows after ASM dependencies are removed.

    Dangerous

  • cellcli -e "DROP GRIDDISK ALL FLASHDISK PREFIX=DATA ERASE=7pass"

    Drops all matching flash-backed grid disks with the DATA prefix and requests a 7-pass erase. This is a destructive storage cleanup command for decommissioning or secure erase workflows, not normal triage.

    Dangerous

  • cellcli -e "DROP PMEMLOG ALL"

    Drops all Persistent Memory log objects on a PMEM-capable Exadata storage cell. This removes PMEM redo log acceleration resources and belongs in controlled hardware or storage reconfiguration workflows.

    Dangerous

  • DROP XRMEMCACHE

    Removes the Exadata RDMA Memory Cache from a supported storage server. On X10M and later systems the cache can be recreated automatically during CELLSRV startup, but dropping it is still a storage-cache maintenance action.

    Dangerous

  • DROP XRMEMLOG [FORCE]

    Removes the XRMEM log using the documented PMEM log semantics on supported X8M and X9M systems. Without FORCE the command fails if saved redo remains; FORCE purges data and can make redo log copies inconsistent.

    Dangerous

Search every command